Originally Posted by Alexey
everybody does. there are 4 plugs in the inverter and 3 gauges so you will only use 3 plugs....
Trying to install my AC S7 gauges, and something doesn't seem right. Does everyone else have 4(!) plugs coming from the ballast while there's only 3(!) coming from the gauges themselves? Any help is appreciated!
Originally Posted by Alexey
everybody does. there are 4 plugs in the inverter and 3 gauges so you will only use 3 plugs....
n3oAcid24 = 01' Galant I4
Yea we all had the same issue. I just started with the plug at the end of the ballast (furthest from black box). and plugged in the gas/temp to that end and then the speedometer and rpm after. I left the male plug closest to the ballast box empty. Hope this helps, PM me if you have any other questions. Its still fresh in my mind because i just installed mine last week.
If anyone who's online right now, knows how to troubleshoot these damn things, IM me on AOL: LSUAlexey Thanks!
i usually test electronic components to a proven power source like the battery to make sure it works before installing it. it would be a waste to take the time to take everything apart and install something that doesn't work.
but yea, what's your problem?
Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.
Bookmarks