Cams.
Hi
Is there any difference between the turbo head and the n/a head, on the 1G?
7G 4G63 SOHC want to be a 4g63T
Cams.
7g for life!
Ok so the valves and the valve springs is the same
7G 4G63 SOHC want to be a 4g63T
whats the difference in the cams? i've been looking but couldnt find the specs anywhere.
Diamond Star Motors - Turning ordinary people into mechanics since 1989.
Cam lobe profile and duration is different for non turbo and turbo. Other than that the heads are the same.
Do the evo 1-3 cylinder head fit my 4g63 sohc 93-?
7G 4G63 SOHC want to be a 4g63T
No cause the engine is turned 180 degrees a eclipse or a hyundai will
thats inaccurateOriginally Posted by bmxmike
the EVO 1-3 heads are the same setup as the 1g and 2g heads, they will fit
Evo 1-3, 1g and 2g heads fit teh 7th Gen 4g64 blocks, will also fit the 7th gen 4g63 overseas
the evo 4-9 heads will fit the 8th gen 4g64 blocks cuz its inverted 180*
thanks
is there any difference betvene the 1g and the evo head?
7G 4G63 SOHC want to be a 4g63T
Im not sure i know between the 1g and 2g the 1g flows more cause it has bigger intake and exhaust ports,.
evo heads flow more and hold more hp, however the evo intake manifold doesnt fit in the galant, neither does the cyclone intake manifolds
(I could be mistaken tho about it flowing more)
It may flow more i have never looked cause i didnt think it would work ill go see if i can find some info out.
Well i cant find any info over the difference in the head it really doesnt matter if you dont plan on doing any port work get a 1g unless you find out some more info on the evo head
ok thanks
but will the dsm 1g or 2g exaust manufold fit?
7G 4G63 SOHC want to be a 4g63T
ya as long as you get 4g63 not the 420A! Just make sure when your looking that it say 4g63 or 4g64... And obx replica is recommened by a few ppl here if you buy off ebay
Ignition module frome a evo
Is it the same as 2g?
7G 4G63 SOHC want to be a 4g63T
You shouldn't double post and you should give more information from what year evo? specs?
---||| 97Galant, E3 16G, Safc, 5spd,Drifter Body |||---
Sorry for the double post dint think that the new thread was out my mistake.
The evo ignition module is from a Evo 1-3
7G 4G63 SOHC want to be a 4g63T
And also wonder if the evo 1-3 cams will fit a dohc head
7G 4G63 SOHC want to be a 4g63T
^They will.
7g for life!
Good so i can just remove the original and bolt on the evo cams.
Will also the later cams fit?
7G 4G63 SOHC want to be a 4g63T
Bookmarks