The Galant Center - Powered by vBulletin

Thread: JDM bulb Questions and suggestions

Showing results 1 to 8 of 8
  1. #1

    JDM bulb Questions and suggestions

    ok I just got the New style vr-4 bumper and fogs with the heads installed on the car... now I need to wire up every thing. I think I got the headlights covered.... I might run into a problem with the diode. now The city lights I plan on running those with the park lights. I'm also going to run hids in the heads now here's one question.... Will the HID's melt a LED city light???? ok now to the fogs.... I see two lights down there I'm guessing there both H3 bulbs. How are they supposed to be wired. do they both come on at the same time? is one a park or turn signal I don't know hopefully you all will respond before the autozone opens I'm plan on going bulb and butt connector crazy. :twisted:

    blue(on the)rims so the G crip walkin

  2. #2
    the fogs for the update model bumper (JDM '98+ VR4/Viento) are dual beam. the inside pair are the fogs. the outside pair are "turning floods"; they flood your side path when u are turning and are activated by the signal on their corresponding side (but they don't blink w/ the signal).

  3. #3
    well I did the fogs.. I got them wired so both bulbs are on at the same time

    blue(on the)rims so the G crip walkin

  4. #4
    Experienced TGC Member njjfudge's Avatar
    Join Date
    02-28-2005
    Location
    Jonesboro, GA
    Posts
    1,447
    Quote Originally Posted by chromeblueES
    well I did the fogs.. I got them wired so both bulbs are on at the same time
    Yes you did

    2001 w/Old Style VR-4 front conversion

  5. #5
    Quote Originally Posted by njjfudge
    Quote Originally Posted by chromeblueES
    well I did the fogs.. I got them wired so both bulbs are on at the same time
    Yes you did


    naw...the city lights won't melt.....HIDS aren't running as hot as regular bulbs.

  6. #6
    njjfudge did the rest of the wiring Thanks :!: I'll paint some thing for you if you need it 8)

    blue(on the)rims so the G crip walkin

  7. #7
    yeah, i don't know of anyone that has done the '98+ JDM front end conversion that has wired the fogs for correct functionality yet... everyone wires them for both pairs together, or use the outside pair as a signal, or outside as a seperate switched fog.

  8. #8
    Quote Originally Posted by Reelax
    yeah, i don't know of anyone that has done the '98+ JDM front end conversion that has wired the fogs for correct functionality yet... everyone wires them for both pairs together, or use the outside pair as a signal, or outside as a seperate switched fog.
    i think this should do the trick. i haven't tried it though.

    Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •