The Galant Center - Powered by vBulletin

Thread: work vs-xx

Showing results 1 to 7 of 7
  1. #1

    work vs-xx

    Hey guys! I found some work vs-xx for pretty cheap and have been searching and I just want to know if these will fit without any complications. I have an 8g and I am on tein s techs and gr2s...Thanks in advance!


    Front 17x8 +47
    Rear 17x9 +47

  2. #2
    You are here entirely tooo much!! fatal1's Avatar
    Join Date
    04-10-2005
    Location
    NYC
    Posts
    3,695
    shouldnt be a problem

    nice choice

  3. #3
    i hope you've done your research, cause there is no point in getting staggered wheels.

  4. #4
    Senior TGC Member lonestar22's Avatar
    Join Date
    01-24-2005
    Location
    DFW/Stillwater
    Posts
    2,752
    besides the reason for getting rims in the first place, good looks
    RIP GALANT, GOOD MORNING BMW 330i

    330i ZSP (E90) - S4 (B5) / hellaflush

  5. #5
    You are here entirely tooo much!! fatal1's Avatar
    Join Date
    04-10-2005
    Location
    NYC
    Posts
    3,695
    im sure the deal he is getting is the reason, thats just the size they are already, not a huge difference though in size, the rear is a bit wider but not drastic

  6. #6
    But when running a 8" wheel in the rear, is there 13mm of extra clearance inside and out to squeeze in a 9" wheel?
    --Rich
    My car is more JDM than yours!

  7. #7
    You are here entirely tooo much!! fatal1's Avatar
    Join Date
    04-10-2005
    Location
    NYC
    Posts
    3,695
    since they are 17's it will rely more on the tire size then that of the wheel

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •