Don't you dare drill any holes in that thing lol
well i put my new valve cover on the kai head i got in my room all the bolts line up perfectly but i saw this
a gap between the hte sensor housing and the valve cover? is thewre something missing? or can i just put in the gap or something?
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
Don't you dare drill any holes in that thing lol
~Lady Driven~
cant tell from the pics.. so im gonna ask.... is the gasket still in the vc?
Hmmm, I don't see a gasket in there, so maybe when you put one on it might seal up the gap
Exactly what im thinking myself.Originally Posted by DNSerrano
the gasket is on it its on the bottom rim of the valve cover, thats what i thought but if i move the cover that direction none of the bolts will lines up
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
The most drastic thing would be to put some, I mean a small amount some, of liquid gasket on that corner then, UNLESS they sell some kind of a seal for that part of the head
yeah thast what i dont understand, the head i took it off of didnt even have that gap, or did it?
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
underrated could you take me a pic of your piece?
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
theres a piece that lines up but its like 2 or 3 mm off the block on the other side, il ltry and upload later, is it possible to have the wrong valve cover? the botls lien up and everything its jsut the side for some wierd reason?, still looking for help!
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
Just wondering.... have you put the bolts back in it yet and tightened the to spec?
~Lady Driven~
my valve cover has almost the same gap as that all the way around.... the valve cover gasket makes it that way.... if the whole valve cover is sitting flush on top of the head.. im pretty sure youve over torqued them.. the bolts are just a little more than hand tight.......
He hasn't even torqued anything yet...Originally Posted by Shadow19
its not about torqued down its say to big of a gap even if they were bolted down i could take off the gasket and bolted it down and itll be closer but itll stil lnot even touch loo kat the pic the gasket wont touch that eve if it was torqued or not becasue it comes out, the gasket goes in the under rim of the valve cover not the outer rim lol
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
Hmm, I replied to your PM in Galants.org but I will post it up here, the head is from a 2002, the 3rd Gen Hyundai Sonata that makes 149hp. The one with the projectors
yeah, maby i got a way newer valve cover, or they did something in the other years or somthing, when i looked at the engine, i was most positive that, it was the right engine, looks just like it and everything, so wtf lol, i ot my bro to go over there and recheck the year
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
valve cover off kia optima made in 2004 sold in 2005, but looks like a 2006, wtf,, but vin number says its a 2001
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
im so lost im gonan loo kat it tomarrow hopefully again
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
Ok so looking at that pic you posted, I dont think their should be a problem. As long as the valve cover gasket seals against that surface. On my EVO head I have a gap too, granted its not that large, but its still a gap. I did some research and the sealant locations for liquid gasket on the valve cover are the same as the EVO, on both sides of the last cam cap on the T belt side and on the semi-circular block off plate at the end of the intake cam. If you need it, here is a link to the Kia Factory Service manual online, free. Dont be scurred about the language install thing, just say no, the manual is in english.
http://58.87.51.38/kme_viewer/
99' Galant ESOriginally Posted by qnz
4G64/63T
AEM EMS
i got a like 2 mm or 3mm gap over the cams at thend left my bro found a piece of liek rubber that goes over the right side, im supsoeing i havnt seen it yet, but i might have ot go there and take the gears off and get the left side maby theresa a half moon piece?
<a href="http://s40.photobucket.com/albums/e202/duh2150/?action=view&current=crownvicbannerpart3.jpg" target="_blank"><img src="http://i40.photobucket.com/albums/e202/duh2150/crownvicbannerpart3.jpg" border="0" alt="Photobucket"></a>
2000 Mitsu Galant, 4g64/Kia Head, 5 Speed, Evo 8 turbo
2000 Ford Crown Vic, DailyDriver
Bookmarks