The Galant Center - Powered by vBulletin

Thread: offset

Showing results 1 to 6 of 6
  1. #1

    offset

    For all you wheel and tire gurus looking at some new 20s my current setup is 20x8 in front and 20x8.5 in the rear with a +34 offset and yes my fenders are rolledand I am running the grIIs and a eibach pro kit. The wheels Im looking at now are 20x8.5 all around but the offset is +45 and I know this is our factory offset. my question is Will I run into any clearence issues?
    Holla At Ya Boy!!

  2. #2
    Senior TGC Member lonestar22's Avatar
    Join Date
    01-24-2005
    Location
    DFW/Stillwater
    Posts
    2,752
    i know there are guys on here that are running 20x8.5s with no problem but they are not lowered. due to the low offset of your wheels you should be fine as long as you pick your tires wisely
    im running 19x8.5 w/ 225/35/19 inch tires lowered on tein s.techs and im doing fine no rubbing whatsoever
    RIP GALANT, GOOD MORNING BMW 330i

    330i ZSP (E90) - S4 (B5) / hellaflush

  3. #3
    I always suggest test fitting whenever possible. You shouldn't run into any fitment issues, especially if you've already rolled your fenders.

    I assume you have a 8th gen Galant (1999-2003). If you have a 9th Gen (2004-Current) than you won't have any issues.

  4. #4
    Yea I have a '01 and my tires are 225/35
    Holla At Ya Boy!!

  5. #5
    225/35zr20 on 20x8.5 +45mm right and you are allready fender rolled? they will fit and even allow you to camber correct the rear if you need to but 225/30zr20 would fit better (225/35ZR20 is more than 1" taller than stock).
    Last edited by Reelax; 04-20-2008 at 07:55 AM

  6. #6
    lonestar22 what is your offset on your 19s?
    Holla At Ya Boy!!

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •