yes they are underpowered, get an 1800 watt amp and itll be your best bet.
Ive got 3 directed audio 10inch SX10D4 with a a1004 directed audio amp.
http://www.audio-n-more.com/Merchant...uct_Code=45155
thats the specs for the amp and the subs are 600watt rms with a 1200watt peak.
Im not sure if I should get another amp or not, but they just feel like it should hit so much harder for 3 subs.
yes they are underpowered, get an 1800 watt amp and itll be your best bet.
Do you have any recommendations for an amp at a good price?
Last edited by Vahn55; 05-08-2008 at 12:49 PM
you'll be paying a pretty penny for an amp that strong
yup, go hifonics if ur gonna get an 1800 watt amp, best bang for ur buck in my opinion
http://www.onlinecarstereo.com/CarAu...roductID=19395
thats the cheapest hifonics amp with that much watts, or u can go for teh 1600 watts for 30 bucks less, in my opinion just get the 2000 watt and turn it down to run at rms
Thats to much for my budget you think this amp will help give them a bigger thump?
http://www.directedxtreme.com/amplifiers/d2400.asp
Could someone also explain to me whats the difference between 1 and 2 channel amps.
Im running two MTX 10's at 600 watts rms on a 1000w amp they don't seem to under powered i just have everything turned down.
Just a recommendation from experience i would get a cap about a 1.5 - 2.0 fared.
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
What does everyone suggest out of these 3 amps.
http://ikesound.com/product-product_id/6627
http://ikesound.com/product-product_id/7381
http://ikesound.com/product-product_id/7383
get the bxi 2008d that`s a deal!
if your running all three 10's i wouldnt get a mono amp, get either a 2 or multi channel amp, and if you get a 2 channel ampyou would have to bridge iit. Mono is made for running 1 sub, although you can run more then 1 off of it. Also if your going for 1800w RMS If you dont have anything in your electric system upgraded then i would start upgrading that. because the higher you get the more power it needs and if you get an amp thats to big your gonna kill your battery and alt. right away.
Last edited by jonk8123; 05-27-2008 at 08:43 AM
2000 Galant ES 2.4L
your best bet is gettting a mono amp. wire em up like shown in the picture and you will get a 2.7 ohm load
find something that does a bit more than 1800 RMS @ 2 ohm, you will be getting a little less power out of it because you willing be running it at a higher ohm load
...pain is temporary, pride is forever...
I decided to just buy my friends system for 350 its all brand new.
2-12" infinity 1252 reference series
alpine mrp-850 amp
It sounds just like I wanted my system to sound so im just going to keep these and sell my old system.
Bookmarks