jdm vr-4 old/new style or the jdm vrg ones work fine
I'm going to be installing the Mugen lip on my 99 galant, and I know that the front will appear a lot lower than the sides. I was wondering which side skirts available for the Galant would fit best with the mugen lip, I don't want anything too fancy, just wanna make sure the sides of the car will line up. Any suggestions are valued.
OZ Rally Crew #001, Quaife Club member :D
jdm vr-4 old/new style or the jdm vrg ones work fine
Which ones are you running, and how much if any modification did you need to do to the skirts to make them fit well?
OZ Rally Crew #001, Quaife Club member :D
super vr4 sides don't really match up with the normal mugen lips.
dude heres pics for reference..old style sides match up pretty well with the mugen lip
even though these are the "new style" sides, i had to do the same cutting to make em fit
http://s5.photobucket.com/albums/y15...MVI_0723-1.flv
Last edited by 01galant01; 06-26-2008 at 03:59 AM
2001 5 speed 4g64T
wow that matches up pretty well!
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
Thanx for the help guys, I'm liking the old style sides, I just want to get all the pieces and test fit them unpainted and then get them painted so I can put them on the car permanently. One last question, the old style sides will be needed to cut like the Super VR4 skirts?
OZ Rally Crew #001, Quaife Club member :D
Bookmarks