extremely basic setup
power wire from battery to fuse within ~ 1 foot. then from fuse to trunk/amp
ground wire from amp to a solid ground in the trunk/rear of the car. a solid ground is part of the metal frame of the car that has been sanded down until the metal becomes shiny. make sure this is attached strongly.
RCA or interconnect wires from back of headunit to inputs on the amp.
remote turn on wire from blue wire on the back of the headunit to the remote spot on the amp.
speaker wire from + and - terminals on the amps to the + and - terminals of the speakers.
its not that hard, but not the easiest thing in the world either. i think its a good learning experience for someone who wants to learn how to modify their car on their own.
Bookmarks