The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
boost you'll need slicks!!! ;)
GREEN is the new BLACK
so trigg only has front flares huh, hmm ill have to take a look at how that flows. but yeah i get what you are saying about the flares adding the need for more offset. i know that if you go all the way out to the edge of the original fender then it should gain you some more clearance. im going to cut mine nearly to the very edge so i can fit at least a 235 under her. oh and ASTIG, as far as tires go, im going to try and get some Toyo R888's or some Nitto NT-01's for the track this summer. should be sick.
Marc, its all good bro, i just wanted to stay on your mind. lol no homo
just borrowing a pic of trigg's car.
![]()
GREEN is the new BLACK
yeh boi! he got the rainguards :D
You mean monsoon shields :P
Trigg's car always looks nice :)
1994 Galant VR-4 GOKUH ( 230kw atw )
2000 Legnum VR-4 ( Daily, 155.5kw atw )
1997 Legnum VR-4 - Yes Another one
1995 FTO - V6 Mivec 200hp
Went off roading, shes filthy
![]()
Taken a while ago. Stock fogs w/ Nokya 7k arctic white.
The ol' brown 86 toyota cressida in the back. That car was great til the timing belt snapped. Fixed now.
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
it's a firmer ride on about 50% setting on all fours. but turning and cornering has never been better. It feels like the car is on rails. got an alignment done today. toe was out of whack front and rear...no surprise...it looked bad just looking at it before. THe fronts are at about -1.2 and -1.4 (L/R) camber. rears at about -1.0 and -0.4 on each side. I told the guy not to mess with the rear camber, but I guess he got too excited. No biggie, It's easy to get that fixed. I also had new Moog endlinks put on. Im also still waiting for my DC sports STB.
GREEN is the new BLACK
i'm running 225/40 tires and 18" x 8.5 wheels at the moment, and all my tires sit perfectly flush with my fenders (with the exception of the typical negative camber resulting from a 2" drop in the rear, which i plan to correct soon with some D2 coilovers anyway).
My question is: can we fit 235 tires on our 8G as long as we just cut the rear fender enough? i mean 235's wont rub on the inside either? i really want to verify this becase i'm getting ready to buy some new tires next week and i really want to get 235's all around.
btw: boost, you're the only person who i've seen on this site who's wheels sit just as fulsh as mine all around. good job.
Last edited by platano; 01-21-2009 at 10:17 PM
I"m running 235's with no problems, my rear fenders are rolled for now, but I only have like -1.2 camber out back, I'm gonna cut them once the weather warms up, and then I'll make it 0, and I'm dropped on coilovers. Depending on how far you wanna drop in the front, you'll have to run some negative camber if you don't have fender flares, or else you'll rub, my front fenders are rolled as well, so I only rub on huge bumps, but the front of my car is slammed almost as far as it will go.
here's the picturesI have now, I'll go snap some more if you need.
![]()
Last edited by greddy; 01-21-2009 at 10:24 PM
OZ Rally Crew #001, Quaife Club member :D
^yeah but the thing about it is that i'm about 1 inch and a half lower than you in the rear, and i dont want to rub.
well, you won't rub on the inside, because when I first got the coilovers, my rear was slammed as well, I was tucking tire, but it looked stupid cuz the front's couldn't go as low, as long as your roll your fenders you should be fine if you run some negative camber, I was running about -2.3, something like that, and I didn't rub slammed in the rear with rolled fenders. ff you want to run camber corrected, you'll have to do some cutting of the lip, which is what I'm gonna do, what size wheels are you running 17's or 18's?
OZ Rally Crew #001, Quaife Club member :D
astig has the stance i want. whats the total offset of the wheels and spacers combined
RIP GALANT, GOOD MORNING BMW 330i
330i ZSP (E90) - S4 (B5) / hellaflush
Bookmarks