The Galant Center - Powered by vBulletin

Thread: whats better for stock setup replacement kyb gr2 or monroe sensa-trac struts

Showing results 1 to 13 of 13
  1. #1

    whats better for stock setup replacement kyb gr2 or monroe sensa-trac struts

    whats better for stock setup replacement kyb gr2 or monroe sensa-trac struts.i need to replace taking off my tiens putting on gtz springs.looking to go to normal ride.

  2. #2
    You are here entirely tooo much!! RAZ_76's Avatar
    Join Date
    11-13-2007
    Location
    -OKC-
    Posts
    3,970
    KYB GR2 or KYB AGX

  3. #3
    kyb gr2

  4. #4
    TGC Regular Boosted's Avatar
    Join Date
    12-03-2008
    Location
    Fayetteville, NC
    Posts
    575
    KYB AGX for sure.

  5. #5
    no between kyb gr2 or monroe sensa-trac which one im on a budget.going back to stock speings.im putting gtz springs on es v6.just want stock .

  6. #6
    You are here entirely tooo much!! RAZ_76's Avatar
    Join Date
    11-13-2007
    Location
    -OKC-
    Posts
    3,970
    kyb GR2 for sure.

  7. #7
    TGC Regular Boosted's Avatar
    Join Date
    12-03-2008
    Location
    Fayetteville, NC
    Posts
    575
    Go for the KYB GR2 then.

  8. #8
    also i put camber kit on when lowered car was there a stock camber kit on car factory?should i take off camber kit i had on w/lowering springs or keep on when i put the stock springs back on ?

  9. #9
    You are here entirely tooo much!! RAZ_76's Avatar
    Join Date
    11-13-2007
    Location
    -OKC-
    Posts
    3,970
    The alignment will be off once you change that angle. I wouldn't take them off but get another alignment after.

  10. #10
    i think it was only one either rear or front whichever was cheaper at the time.so leave the camber kit on.did the car come stock with camber kit?does it matter that the camber kit was for use with lowering springs or it will work with any.i will only benefit from it?

  11. #11
    like what everyone said..KYBs

  12. #12
    Quote Originally Posted by 01nygalant View Post
    i think it was only one either rear or front whichever was cheaper at the time.so leave the camber kit on.did the car come stock with camber kit?does it matter that the camber kit was for use with lowering springs or it will work with any.i will only benefit from it?
    You don't need any camber kit with GTZ springs, just get an alignment.

  13. #13
    monroe is crap.

    go kyb.
    From Boost Addicts to Carbon Fanatics™ www.socalautowerks.com

    Censee: Im trying to pimp some hoes for money for the lsd. 3/28/2011
    Cali: Sig 3/28/2011

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •