Very simple.. Just take off whatever seems to be holding it up.. It's really much more simple than it looks..
ok so I need help on how this headliner is taken out and put back in.
Want to replace the old fabric with a more heavy duty kind:D
Very simple.. Just take off whatever seems to be holding it up.. It's really much more simple than it looks..
Very nice tutorial, probably gonna get started on it next week when i get paid:D
pry out the fron pillars, and the rear covers. Unscrew the sun visors. Pry out the plastic cover on the piece where the seatbelt goes thru, there is 17mm bolt - get the seatbelt mechanism out of the way. pry out middle pillars. there are 2 or 3 button screws on the headliner close to the rear windshield
that does sound pretty easy...easy enough for a girl...hmmm i may want to do this project as well on my G...
"Love My 8G"
im gunna redo my rear deck to match my ceeling in my 7g when i put my vr4 wign on and get rid of the 3rd brake from the rear deck completely
ZIGONATOR
This is how mine looks like. I redid it 2 years ago. Im sick of the red now and ill probably redo it when it gets warm wih some black fleece
i did mine in black with red sunvisors.. matched my corbeaus that i had before i sold it and got it back
ZIGONATOR
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
not hard.. unscrew them and then take like a puddy knife and stick it in where the 2 folds meet and break the glue.. peel the old fabric off refab it and glue them back together.. maybe 30 min on each
ZIGONATOR
this is fleece from walmart, its like 10 bucks. they have all kinds of colors. And some 3M adheseve spray
I remember seeing some at wal mart a while ago. I'm gonna check tomorrow to se if they have some navy blue:D
i re did mine three times and the glue still wont hold and i used the 3m tacky 77 suposed to work really good just didnt for me. Im going to redo it again.
Word of advice for anyone that is going to attempt this, let the headliner sit for a couple days in a basement with a dehumidifier running will halp the glue adhere properly.
1996 galant s
finishing up my 2.4L DOHC, 10.5:1, precision sc60, meth injected MONSTER.
I used suede and 3m spray glue.
Bookmarks