No mods needed with this kit.
Will run you around 4800.00 installed.
www.rippmods.com
They make a kit for the 4 and 6 Cyl.
how much would it cost to get a supercharger for an 01, and what would the best one be with price? also what major mods would be needed with the s/c to get max hp, and the smoothest ride?
No mods needed with this kit.
Will run you around 4800.00 installed.
www.rippmods.com
They make a kit for the 4 and 6 Cyl.
Love,
Matt
<div class='quotetop'>QUOTE(VegasMatt)</div><div class='quotemain'>No mods needed with this kit. Â*
Will run you around 4800.00 installed.
www.rippmods.com
They make a kit for the 4 and 6 Cyl.</div>
Hows your project going so far matt..?
I Shook You At The Track, My Boyz Threw Asprin On The Floor, They Said Now You Gotta Headache...
The illiterate of the twenty-first century will not be those who can not read or write, but those who can not learn, un-learn and re-learn.
I hope to have it started by this weekend. I can't wait, I have that "Is it Christmas" giddyness.
Love,
Matt
actually the mods that you will need are headers. the SDS kit cant be run without them. I found this out the hard way. the stock exhaust manifold only flows 800CFM while the blower puts out 1800CFM. So as you see the engine cant get rid of the heat as fast as it is producing it. result, either melted plugs (which is what happened to me) or burnt piston.
and about howmuch on top of the kit would the headers cost me?
headers will run you anywhere from $between #350-$500
Semper Fi'
My bad, yes you will need the headers. You can get them from Ripp or contact VisionImports for the RPW's.
Love,
Matt
<div class='quotetop'>QUOTE(VegasMatt)</div><div class='quotemain'>I hope to have it started by this weekend. Â*I can't wait, I have that "Is it Christmas" giddyness.</div>
I know what you mean, i pick up my manual tranny 2morrow, and the nerves are building up...
I Shook You At The Track, My Boyz Threw Asprin On The Floor, They Said Now You Gotta Headache...
The illiterate of the twenty-first century will not be those who can not read or write, but those who can not learn, un-learn and re-learn.
Awesome, I didnt know you were doing that project, good luck!!
Love,
Matt
hey, i'm new to this. i have a 01 es v6. thus far, i have the cai (injen) and dual exhaust. i've noticed a big difference. what should be my next step? i was gonna get the NGK plat plugs & wires next. i'm not sure if what should be done next.
replace your exhuast piping with Mandrel bent 2.5" piping.
Love,
Matt
is the mandrel piping custom fitted for galants?
you have it made for your car.
Go to your muffler shop that you use and tell them you want to replace your crushed pipe with mandrel bent pipe.
Love,
Matt
thanks a lot for the info. i remember reading something about the SEMA '04 int the TGC. i can't find it. does anyone have the details as far as a where we all meet when we drive to the wess syde? day of the event... all that good stuff.
VEGASMATT...that's a nice kit on your ride. i like that hood too.
Thanks man. I hope you can make the meet in 04. You can find the topic under upcoming shows and events.
Love,
Matt
Bookmarks