you had manual locks and windows too?
coming along nicely. does your strut brace hit the hood? i had to trim the skeleton unter the hood
Now that circuit city went under ill have the time needed to start and finish my 7g... Over the next few weeks ill be posting progress and i hope to move pretty fast with it. Any comments, positive or negative are welcomed as well as ideas, dont be afraid to speak up i assure you i wont lose any sleep over it!
Also this is going to be a full build and i know its messy now but it will be cleaned up so dont worry about that..
All of this was done yesterday when i found 2 hours of free time between errands.
Out with the 275's and in with the 450's
Again with resistor pack (not installed yet)
Fuel rail out
Fuel rail back in and test fit vr-4 strut bar
Maft mounting location
Teaser pic
Vr4 wing FTW
And another
And project for 2morrow if its nice out
-Python 460 hp security and keyless entry
-Audio sensor
-Dual zone motion sensor
-4x Door lock actuators
-Trunk release
-2x Relays
I may also run my FMIC pipe 2morrow..
ZIGONATOR
you had manual locks and windows too?
coming along nicely. does your strut brace hit the hood? i had to trim the skeleton unter the hood
"DSM's, making people mechanics since 1985"
Originally Posted by polishmafia
ZIGONATOR
Take a pic of the front bumper, what lip is that? Vr4 spoiler looks sexy
what's with the horsepower in a box, didu really buy one of those ebay horsepower "booster chips"
OZ Rally Crew #001, Quaife Club member :D
teaser untill i mold n finish it!
heh not really... its to run a gm mas in place of a mitsu mas...
easier to use with intercooler pipe, adjustment for larger fuel injectors, ect.. its actually maft pro so i have the controller mounted in the car under the arm rest but its not wired up completely.. ill post pics of that when its done as well
ZIGONATOR
1991 Galant VR4 1948/2000_________1996 Galant "S" 5 speed 2.4L turbo
^thanks for clearing that up, I saw a horsepower chip on ebay that looked just like that, that's why I asked.
OZ Rally Crew #001, Quaife Club member :D
"DSM's, making people mechanics since 1985"
Originally Posted by polishmafia
yeah, post a pic, cuz i just ordered the strut bar
ZIGONATOR
i do.. well i did alot of stuff is sold off of it and its going back to usdm body style
ZIGONATOR
Looking good man =)
1994 Galant VR-4 GOKUH ( 230kw atw )
2000 Legnum VR-4 ( Daily, 155.5kw atw )
1997 Legnum VR-4 - Yes Another one
1995 FTO - V6 Mivec 200hp
so i wired up my resistor pack today, started it up and smoke was pouring out the exhaust.. popped the oil lid n there was white cloudyness in the oil... so time for a full engine build n not just a "bolt on turbo" setup :(
lookin to buy a 4g64 (for a 95) if anyone is selling one thats in good running condition let me know!
ZIGONATOR
Bookmarks