The Galant Center - Powered by vBulletin

Thread: Pwr steering & Alt/AC belts?

Showing results 1 to 5 of 5
  1. #1

    Pwr steering & Alt/AC belts?

    How easy/hard is it to change? What are yalls techniques and experiences with changing both belts on the V6?

    Need some input! Thanks
    1999 North Star White V6 8G
    2003 Yamaha R6
    2008 Lancer Evolution X

    The Original FACTION from the BGR Days
    First Founder of TGC Florida 2002-2005

  2. #2
    TGC Regular
    Join Date
    09-30-2002
    Location
    San Gabriel, CA
    Posts
    573
    https://www.thegalantcenter.org/showthread.php?t=36177

    check out the 2nd and 3rd pic. very easy.
    Your signature is too long.

  3. #3
    I don't HAVE TO take off the timing belt cover and engine mount just to do the belts, correct? That would be a pain since I can't have a jack under the car to hold the engine because my car sits at a steep angle. Previous owner had the timing belt replaced, but like a moron didn't replace the accessory belts.
    1999 North Star White V6 8G
    2003 Yamaha R6
    2008 Lancer Evolution X

    The Original FACTION from the BGR Days
    First Founder of TGC Florida 2002-2005

  4. #4
    TGC Regular
    Join Date
    09-30-2002
    Location
    San Gabriel, CA
    Posts
    573
    the timing belt cover and the engine mount is only to get to the crank position sensor. u only have to take off the big plastic cover under the fender behind the wheel which isn't pictured. you'll see it once u take the wheel off.
    Your signature is too long.

  5. #5
    Things done finished! Thanks
    1999 North Star White V6 8G
    2003 Yamaha R6
    2008 Lancer Evolution X

    The Original FACTION from the BGR Days
    First Founder of TGC Florida 2002-2005

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •