get them blue shits
ZIGONATOR
So i got the delivery notice yesterday morning... but i was sleeping :)
I went to pick-up the box today...
Does any one know what harness or how i should go about the connection on these??
sorry for the celly shots..
Nice white jdm markers! Does it come w/ the wiring connector? I think that's what you were asking me. Mine came w/ the connector so i don't have to improvise.
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
Well yes it is a Rolex, My dad got it for himself about 5 years ago after a deal went through, and when i moved to Toronto and he stayed in Florida, he gave it to me as "don't forget me, this is worth more than your life" type of thing lol...
I normally keep it at the bank tho... i never wear iit
Click on this image link and you'll see what you are missing..
http://passwordjdm.com/images/Produc...ss%20Large.jpg
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
oh.. shit lol...
any possibility to pick these up in NA or have to be imported as well?
Try to pm Trig and ask him about the connector that it should comes w/.
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
that's not good.. oh well you might just want to solder the wires directly to it or use wire connectors.
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
Trigg PMed me... mentioned he could get them.. but it would take a while.. he says something like USD 20 shipped... it's not bad.. but he gave me the part number (MB943607) i'll try going to mitsu here see what they can do.. I have a friend that owns a mitsu dealer and see what HE can do.. other wide I just got my Dremel kit, and i will begin practicing.. if worse comes to worst.. i'll end up putting them in and eventually connecting them, when i get the connectors.
oh then perfect! practice on a card board first! goodluck!
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
no no dont practice on card board practice on a piece of wood witch will be similar to metal
03 I4
lol I own a shop.. i got TONS of metal to play with
that's perfect!
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
i like those lights
Plans have changed : /
Work for this summer went to shit, so as i wanted to do my tranny first... looks like i'll bee doing full catback exhaust, intake... maybe outlander exhaust manny
Bookmarks