assuming the 7gs are the same, the top one.
How does the IAC look like?
Which one of these is it?
assuming the 7gs are the same, the top one.
From Boost Addicts to Carbon Fanatics™ www.socalautowerks.com
Censee: Im trying to pimp some hoes for money for the lsd. 3/28/2011
Cali: Sig 3/28/2011
Its the bottom one. The one on the top looks like the one from a 90 eclipse turbo.
the bottom one is the valve and the top is the motor.
Not how fast your car goes but how good u drive going fast.
Drive It Like You Stole It!
7G Erubini Body Kit for sale
http://thegalantcenter.net/forum/viewtopic.php?t=57678
Where does it go on the throttle body?
Does it go where that black peice is at?
Or do i have to remove something else
The Second is an IAC for a 7th gen galant, and the second is the IAC motor for an 8g galant.
If your replacing the 7g then there's about 4/5 screws on the bottom of the throttle body that needs to be removed so that you can attach this one..
---||| 97Galant, E3 16G, Safc, 5spd,Drifter Body |||---
be careful when removing the screws, they're very easy to strip; i had to cut mine off. and to confirm, the 2nd picture is the 7G FIAV/IAC
So in order to reach the IAC i have to remove the four screws that hold in the IAC valve
take off the throttle body assume you know how to
then flip it over you will see some Phillip screw take it out and your iac will detach with the tb, then replace it
I already took of the throttle body. I see two sets of screws, some small ones holding in a black peice and another set of larger screws. So i remove the larger set of screws to get to the IAC?
there are 2 screw that holes the connector, you dont need to remove the connector
it is either 4 or 5 i forgot how many
OK I still can't seem to locate the IAC:/
I've taken the throttle body apart and i don't see where this IAC is at?
Did I order the wrong part or something?
Bookmarks