to run the brembo's and a wheel with a 2.5" lip is going to be very very tough. You'd probably be talking a final offset offset under 15mm's, so a +32 offset wheel with the 10mm spacer still wouldnt be enough, you'd need a 20mm spacer and then it will be close. Spoke design is a HUGE factor here. If you get a wheel that has a nice lip but the spokes come out (away from the rotor/caliper) at a steep angle, you might be able to clear it with a higher offset, by higher I mean in the +25 area instead of +15
Bookmarks