well i'm sure there is a red wire for power and black for ground. from there what i did was attach another wire, then try a button on the the controller.
example
you connected green and yellow wire from the mirror and the orange and blue wire from the controller and the controller was set to right side. You go through the all the directional controls and power fold buttons until something happens. if nothing happens set control to left side. so lets say nothing happened until you set the control to left side and when you pushed up on the directional pad, the mirror turned inward to the right
mirror grn/yel --- orn/blu control (control set to L) you pushed up and the mirror(glass part) moved right , you pushed down and the mirror moved left
you could then deduce that;
grn/yel makes the mirror move right
and the orn/blu is the up and down wires of the control
the stripe color of the wire will probably be color specific for each side. all wires to the left side may have yellow, and all wires to the right may have red.
Bookmarks