Galant306m's turbo build

[Galant306m]

..... is it a special heat treated proprietary alloy bolt?
no, its not. OEM mitsu turbo bolts are the way they are for a reason. Even down to the special spring washers.

LOL, well yes it is a alloy bolt and yes it is heat treated. Alloy steals come in many different types its dependent on the amount of iron and carbon and the grade of the bolt refers to the hardness (heat treating process) so yes they are heat treated alloy bolts. Its the highest grade metric bolt (grade 12 for metric) I doubt that i will have a problem with the damn bolt. I can see and under stand your point with the manifold, but the bolt is under little strain and im pretty sure that it is made out A2 tool steel which most high grad bolts are and if you look up the uses from that type of steel you will see that they use if for stuff that takes more abuse then a bolt mounting a 02 housing on a turbo.

[Galant306m]

more parts came today, I got my clutch, brake, and gas pedal, 1g cas, 2g coil ignition, and my 2g water pipe.

[bmore303]

how the hell do you pop the wires out of the plugs? Driving me nuts cause i pop the white tabs up and nothing. Im about to just cut and solder

I had to stop and lol at this. I was with you, completely said fuck popping them all out and back in.

[Galant306m]

its a pain in the ass you have to hit the wire just right to make it come out.

[WhiteGalant]

o shit kenny posted something

[Galant306m]

cars home now i get to work on her everyday.

[Ivory8g]

nice! i want a garage that i can just work on my car when i want!

[M-Rod]

Good to hear. Should be running in no time!

[RedGalant2k1]

I see you moved all the dead bod....err nice garage.

[Galant306m]

Lol dave!

Yea its super weird having it here, put my heads back in did a check on my ecu and she is working with dsm link so I'm happy, going to tackle ignition today, and the fuel system stuff

[Voodoo]

I see you moved all the dead bod....err nice garage.

did a check on my ecu and she is working with dsm link

So my EPROM job is working?

That's it, boy. Get in there nice and deep, like.

[DOHCstunr]

Sweet man. Did you cut your lip out to clear the intercooler nad then graft it back in?

What muffler is that?

[phizzalot]

Nice build, Can't wait to hear how this all turns out...

[Galant306m]

I cut a ton of shit off that bumper. to make that FMIC fit, and the grill is staying out.

My muffler is a magnaflow. I can get the part number for you, if you want cause it really does sound good on the galant. I would show you but yea lol car has starting issues right now :( .

Thanks phizz. I can't wait for it to start up again.

[seth98esT]

Where are you stuck at? Lets get this pig running.

[Galant306m]

Where are you stuck at? Lets get this pig running.

not stuck, added the wires for my ignition coil yesterday and the wire's for my knock sensor. my friend has a two 2g fuel rails for me to use. Got to mount the ignition on my manifold swap fuel pumps this week, put my front end suspension stuff on and get a differant slave cylinder because it is missing the little push arm somehow and i didnt notice it. get some lines for the cluch and do my pedals.

[DOHCstunr]

I'm actually going to go with one of the vibrant mufflers. I have a 3" straight through 7"round x 36" long magnaflow in the straight section of my exhaust tunnel. Its flipping massive but makes the car soooooo sexy and quiet. My old megan can on the end is completely shot so i'm in the market for some new hotness.

[mko]

Yeah thats mine 7'' round x 18'' long body magnaflow resonator. I havent installed it yet

[DOHCstunr]

when I got mine I freaked out cause it was soooo damn big. shit man i mean 36" long!!!!
it looked like a damn diesel truck muffler.
somehow though it fit perfectly... and I love it.


back on topic.

[Galant306m]

my friend has been bugging me to get one of those and i never listened to him.