any idea the size as our hub is 4 x 114.4 i believe
i know this seems like a strange question, but are there any cars with a small 4 lug hub that would bolt up to a 7g? I have a buddy that wants to give me a set of flawless gunmetal TSW Volcanos 17" with good tires.
I will get them in exchange for my second set of snowtires. The only drawback is they are not universal 4 lug.
any idea the size as our hub is 4 x 114.4 i believe
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
So you need a 4 x 100 ?
Cause that pic is of a 5 stud wheel ?
1994 Galant VR-4 GOKUH ( 230kw atw )
2000 Legnum VR-4 ( Daily, 155.5kw atw )
1997 Legnum VR-4 - Yes Another one
1995 FTO - V6 Mivec 200hp
What car are they coming off of?
2001 w/Old Style VR-4 front conversion
your problem is that a corrado has a lug pattern of 4x100 and the galant has one of 4x114.3, there is no good way to put those wheels on our car
Light em up.
97- up mirage are the closet chance that you would have but the hub center is 56.? and yours is 67.? so the swap prob would not work due to axle diameter
the other question is are you sure that there not universal 4 lug alot of companies due that so you have a wider range of cars to fit if they are then they would be both 4x100 and 4x114.3
Or you could just get them redrilled to 114.3 x 4
1994 Galant VR-4 GOKUH ( 230kw atw )
2000 Legnum VR-4 ( Daily, 155.5kw atw )
1997 Legnum VR-4 - Yes Another one
1995 FTO - V6 Mivec 200hp
JB weld them bitches on there. Youll be ok
I know for a fact that they are not universal 4 lug.
I will deffinately look into the redrilling. any suggestions on places that do it?
It also occured to me today that if I change the hubs, then I would need new rotors and drums as well since they are also 114.3 x 4.
That JB weld shit just might work!!LOL
Here in germany a manufacturer offers adapters to change the different diameters from 100 mm to 114,4 mm... You can also order the different middle-diamater.
The side is on german, but if there is interest maybe I can help you...
http://www.schippan-shop.de/EXEC/7/4...BC4A103499E340
I translate:
Adapter thicknes 20 mm /each, total at axle 40 mm
Outer diameter 148 mm, from 4 x 114,3 with 67,1 mm to 4 x 100 with 57,1 mm.
Made out of alloy, with pressed steel-sleeve for M12,5 x 1,5 (original Volkswagen mounting...)
For testing mount only at the rims.
Check, if there are between 7-8 full revs possible and bolts will not be too long.
Hexagons will be included for mounting at your hubs, check if bolts are not too long, otherwise they must be shortened.
price for each axle: 91,50 €, that are 136,45 $....
You can order each type of adapter, for every manufacturer....
I think this will help..
http://www.custom-wheels-spinning-ri...Mitsubishi.htm
Edit: these cars have the same bolt patten and close offset.
Acura 2.2CL, 2.5TL, 3.0CL, Legend, Vigor
Eagle Summit
Chevy Metro
Dodge Colt
Ford Festiva
Honda Accord(90-98), Prelude (92-96)
Infiniti G20/M30 of course
Mercury Capri (91-94), Tracer (88-90)
Mitsubishi Expo, Galant, Mirage (85-92), Precis, Starion
Nissan Altima, Maxima (85-88), Stanza, 300zx (84-89), 200sx(84-88)
PLymouth Vista
Sterling 825,827
Suzuki Swift
Toyota Celica (76-85), Supra (79-85)
Last edited by RedLine DOHC; 11-21-2009 at 11:43 AM
Bookmarks