Post a pic as your car sits now....

[Stewi]

The biggest thing with using the 3m tape is using their surface prep. Body shop supply places sell it, its in a package like wet-naps. Its an adhesion promoter on what looks like a baby wipe, your supposed to clean the surface first, then use the wipe, then apply the tape.

[Team Helotes]

I used the prep that looks like wet naps. It tape came loose from the glass not the plastic.

[03-Galant-ES]

I used the prep that looks like wet naps. It tape came loose from the glass not the plastic.

did you clean the car first? or at least the window?

[Team Helotes]

did you clean the car first? or at least the window?

Should I have?






Yes I did not my first rodeo with the tape.

[4g63lover]

I've replaced the tape on my EGR twice so far. I have the loctite adhesive tape on my mounts and 3m body moulding tape on the actual visor. If only we could drill into the glass I would. But I will most likely replace the tape again come spring.

BTW, 5'9" 212 lbs 34x32 checking in

[IVORY_G]

I have a 28 inseam so my being the same height as you you can imagine my issues fitting in cars with roofs.

Jeez! You are all Torso.

holy schnikes, 36" inseam

And You're all Legs! LOL!


Im a 33" Inseam, 38" waist.

6'4" 300lbs
42x36 jeans

DAMN! Ok you win! LOL!

[99 galant]

6'4" 160lbs, 32x34

[qnz]

did i just click into the "outgay my thread?"

[seth98esT]

I think this is now the "outweigh" me thread.

[E_Emerson88]

back on track lol



i was waiting all week for this. too bad i dont have a camera so i took it with my phone lol

[sponcar]

Keep it up.. U almost caught me..! I was 199,3xx last week when I sold the g.. And guess wat still running strong as hell.. So now I can say that the 4g64 is the best.!!

[G-spot]

I bought a low-profile jack lift but my svr4 sides still hits against it. I'm thinking of getting vr4 sides and going back to my vr-g lip. then it will be flush all around.

[qnz]

i say you get some planks of wood (or in my case, a sheet of sheetrock) and drive your front tires over the wood so that you have extra space to jack up the car.

Anyway, you can jack up your car using the front jacking point instead of using the sides

[03-Galant-ES]

i say you get some planks of wood (or in my case, a sheet of sheetrock) and drive your front tires over the wood so that you have extra space to jack up the car.

Anyway, you can jack up your car using the front jacking point instead of using the sides

My car is too low for my jack and tow truck jacks. To jack it up front I go in the front wheel well there is a good spot like 5in behind the wheels.

The rear I just jack up by going under rear bumper.

P.S. guys this is what I am gonna be trying to fit in my fog housings next week

They look good I think and they look like they may fit decently after I dremel the back of the fog housing a bit.

[polishmafia]

I drive my car onto pieces of wood or used rotors at the shop, and just lift the car on the pinchwelds.

[G-spot]

.

Anyway, you can jack up your car using the front jacking point instead of using the sides

that's in the middle of the front/rear cross member right?

[Boosted]

back on track lol



i was waiting all week for this. too bad i dont have a camera so i took it with my phone lol

I'm right behind you at just a little over 166K.

[03-Galant-ES]

I'm right behind you at just a little over 166K.

my bmw is at 167k so its right ahead of u guys. G is at 89k now

[blue8g]

low mileage checkin in............73 k

[4g63lover]

Keep it up.. U almost caught me..! I was 199,3xx last week when I sold the g.. And guess wat still running strong as hell.. So now I can say that the 4g64 is the best.!!

you sold the Galant?