Just a few updated photos more to come as I progress!
Just finished priming all the plastic pieces from the Car.
baking in the FL Sun
my car is in pieces right now!
So I decided to break my driver side door switch panel!
Just a few updated photos more to come as I progress!
Just finished priming all the plastic pieces from the Car.
baking in the FL Sun
my car is in pieces right now!
So I decided to break my driver side door switch panel!
The other day I cleared the corners of my turn signals. took me a little while to post photos.
front shot!
looking good. What color you going to paint all the plastic parts?
Im going to paint it all A nice black. I just finished laying the first coat of black on all the pieces. Im getting close to being done I'm just starting to lose daylight soon.
ok so this is were i'm at after painting two coats along with the primer. I'll do a few more tommorow and let them set then Install them.
http://photos-h.ak.fbcdn.net/hphotos..._3861923_n.jpg
So I got my yellow Xenon fogs I ordered online today. Here's some night time shots!
What are you using to paimt the interior? Rattle can?
Currently on my 3rd 8G... Not giving up this time!
Just finished the last coat of clear coat. time to cure for a few hours and I'll have pics up later installed.
so here's the final product of me painting my trim!!!
my driver side panel
passenger side and A/C vents
radio bezel, shifter bezel, and a/c vents
looks good, I need to repaint my interior trim! Did you sand yours or just prime it?
nice! Looks very good!
Great work on everything so far. Those interior pieces do look better in black IMO
Success is achieved through dedication and personal sacrifice. Eye for an Eye_Tooth for Tooth_Blood for Blood.
how many clear coats did you use? hopefully a couple, that sun will kill that fusion paint asap
-Chris
Yea I used plenty of clear coats. I painted my trim before over a year ago and it did perfectly fine
Bookmarks