xenon

[bigmacak22]

hi there i need a little information..i got halo projection headlight..and they uses a H1 type of a bulb..so today i receive the h1 bulb..the bulb is 30k xenon hid..so there are 2 bulbs..each bulb has 5 wires..three wires goes to the digital balast..but there is 2 wires that has connectors..i don't know where those wires goes..wires colors are BLACK and BLUE..does that wires goes to the stock headlight plug(connector for connecting stock headlight bulbs) or those two wires goes to somewhere else..can someone help me in here..thanks for your help..

[showtime]

pictures? 5 wires, seams like a lot. Are they hi and low, or just low?

and 30K HID.....your going to have a lot of cop trouble.

[bigmacak22]

they are single beam..but i live in ohio so the cops won't do nothing to you..i see alot of cars with colored headlights

[bigmacak22]

i had before on my stock headlight 30k deep blue.and cops never pulled me over for the 30k headlights..

[03-Galant-ES]

There is an edit feature...the 3 wires go to the ballast and the 2 wires go to the harness. With the projector heads came a separate harness that went to both lights. The hot wire for your lows is either red or blue that goes to blue wire on bulb and the black wire is the ground.

The HID Bulb:

The Harness:

This is what you do:

[bigmacak22]

thanks galant es for the pictures

[johnygezony]

LOL his sig works as the finished product !

[03-Galant-ES]

yeah except I dont have 30k sorry im not baller like that I stuck with 4300 in low and 5000 in highs. The 5000 is still too blue for me.