Galant306m's turbo build

[Voodoo]

Here's the diagram for IAT wiring for the 3G that NAPALM made a while ago that you requested if you still need it:



Though I'm sure all of the wires will be different.

[Galant306m]

yea min is a signal wire from pin 72 and then just a ground just have to make sure that they are the right way or it will read -degrease

[Galant306m]

bitting the bullet to get this car going there are to many loose ends on my wiring to track down just gonna swap to a 2g awd harness tomorrow i picked two harnesses up from a good guy in my area for 50 bux, he is actually a really well know person in the dsm world for his transmissions he builds. got the old harness about out of the car in roughly 15 mins of my work i should have it all the way out tomorrow and wired back up for the 1g cas and everything mid day.

Im going to live stream my first start up on the car if anyone wants to watch here is my qik channel qik.com/galant306m ill post up when we are ready to start the thing.

[seth98esT]

If you dont have her done by Sat, I will come up and help :)

[Galant306m]

new harness is all in just getting it all set up

[Galant306m]

[seth98esT]

Update son.

[Galant306m]

[DOHCstunr]

I'm not going to lecture you....

just promise me you are going to solder, heatshrink, bundle(with elec tape) reloom, and seal the loom with tape...

[Galant306m]

I am only way I wire stuff

[seth98esT]

So whats left?

[Galant306m]

iac, knock sensor, mfi relay, resistor packs, figuring out what to do with a plug that is under the dash haha.

[Galant306m]

is anyone ready to shit brix?

[Ivory8g]

Um yah!

[Galant306m]

kk well i think that i may have this thing all ready to start by tomorrow sooooooo lol

[Ivory8g]

WOOT!!! Oh finally!!!!

[bsilver23]

thatd be sweet if it is done tomorrow mitch

[Galant306m]

yea i want to drive it again brian if you want to come check it out let me know ill text you my address

[blue8g]

Wait. Mitch it's done?

[Galant306m]

will be