The Galant Center - Powered by vBulletin

Thread: 2002 ES injector color codes

Showing results 1 to 4 of 4
  1. #1

    2002 ES injector color codes

    Does anyone have the color codes or better yet wiring diagram for the injector wiring on 2002 2.4L Galant?

  2. #2
    Experienced TGC Member run1206's Avatar
    Join Date
    08-15-2006
    Location
    Perth Amboy, NJ
    Posts
    1,558
    the wiring diagram should be in the Galant Service Manual for "Fuel Injection" (can't remember what section of the manual it was).
    Do a search for it, should be somewhere in the forums.

    02 Mit. Galant 5 Spd -> 2010 Mit. Lancer Sportback 5 Spd -> (current) 2014 Mit Evo GSR 5 Spd
    run1206's Rear Disc Tutorial
    run1206's CF Hood Resurface Tutorial

  3. #3
    Experienced TGC Member run1206's Avatar
    Join Date
    08-15-2006
    Location
    Perth Amboy, NJ
    Posts
    1,558
    saw what you wrote earlier... you mentioned wiring a resistor pack.
    Are you trying to wire up the DSM injectors maybe?

    02 Mit. Galant 5 Spd -> 2010 Mit. Lancer Sportback 5 Spd -> (current) 2014 Mit Evo GSR 5 Spd
    run1206's Rear Disc Tutorial
    run1206's CF Hood Resurface Tutorial

  4. #4
    You are here entirely tooo much!! Stewi's Avatar
    Join Date
    08-04-2003
    Location
    NY
    Posts
    4,344
    Its located here, second to last one that says circuit diagrams, look for the one that says MFI system, I cant recall which page of the MFI section its in, but it is there.

    https://www.thegalantcenter.org/showthread.php?t=39350

    If your trying to wire up a resistor pack, you really dont even need the diagram. The resistor pack gets wired in fairly easily. Locate the power wires that go to each injector, typically its a red wire with a line of a different color on it, go up about 3" from the injector wiring connector, cut the wire, take all 4 wires you cut and wire them to the single wire on the resistor box, then there are 4 wires coming off the box, wire those to each injector connector where you cut them. Injectors are under constant power, the ECU grounds them to fire them, thats why its OK to wire all 4 of them to that single wire, since the power is always equal between them.
    Quote Originally Posted by qnz
    well there are talkers and there are do'ers. talkers never do. and do'ers never talk
    99' Galant ES
    4G64/63T
    AEM EMS

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •