the orange one has the tornado front bumper from the e46 bmw made to fit the galant, u can find copies of it on ebay front bumper or complete kit
Nobody built like u, u desighn ur self.
5spd swap
full custom body conversion
18x9 Works VS
Big 16g evo3T next project
i have that kit man but it'll cost you 5 grand.
:D
From Boost Addicts to Carbon Fanatics™ www.socalautowerks.com
Censee: Im trying to pimp some hoes for money for the lsd. 3/28/2011
Cali: Sig 3/28/2011
Sorry dude that kit is awesome, nearly every galant owner that sees that galant wants it, but it all custom work, Predat-r already told you what bumper you need to modify, and Icedout told you that a rough estimate would be 4k not including the paint. Cali makes replicas of JDM bumpers so check him out, but the kit on the red galant is pure custom if you have the money(6k-7k maybe more) do it, but it isn't something you can buy already done and install it.
4g64T 5spd
so what say yee OP are you going to go for it?
It's funny cause only one guy had the right bumper in this forum. Thank you Predat-R for pointing me in the right direction. Yes it is custom, but its attainable and not from scratch.
HERE is the link...
http://www.electrodyne.cc/Merchant2/...&store_code=ED
look dude, I told you it was a BMW 3 series bumper, just couldn't remember exactly what it was called. There has actually been a few threads on here about this bumper before, but I wasn't going to do all the searching for you, that's your job.
If you would have searched "BMW bumper" you would have found this thread about 6 down from the top
https://www.thegalantcenter.org/show...ght=bmw+bumper
Read a couple posts and then BAM the answer is right there for you. But I guess that's too hard.
And what we mean by custom is not that the BUMPER is custom, but that the fitment on the Galant is custom. They also had to make a widebody to match the bumper.
That said, are you going to go for it?
^no.
no he's not going for it?
Just judging from his posts there's no way this guy could afford to do any of this
IF he buys the bumper he's going to try to put it on
Say oh noes it doesn't fit
Cry
Sell bumper for a loss
Come back here make a thread, WTF you guys told me this bumper would fit
oh right.
look OP, what you have to keep in mind is HOW MUCH custom work probably had to go into that just to work. I'll just make a short list of what I think you might have to do:
1) fabricate some mounting points on the bumper itself since they're not going to be in the same location as a Galant kit
2) add/remove material under the grill, headlights, and around the headlights
3) add a widebody to the fenders, because if you look at the original kit, it flares out a lot farther than the stock Galant fenders go
4) for US Galant, you're going to have to trim or completely remove your crashbar. That bumper looks pretty shallow
5) paint to match the car, OR paint the entire car
another option is to cut down the bumper or remove the side flare-outs so that it lines up better with the lines of the Galant
All that said, if you had the money to get this done, you would probably have gone to an extremely reputable and high-end shop, shown them that picture, then told them "I want it exactly like this". Even if they weren't able to recognize the kit, they could probably do it.
Bookmarks