nice man thats a sweet idea i just wired mine to a light up switch.
1 pull down dome light
2 solder wires to dome light u can do this with one or two sets ( i used 1) if u use two u can make it so that when u push one side it light up the led under dash as well
3 run wires use a snake (in my case a car opening tool lol)though headliner then down the dash out of the bottom underneath the glove box. and run wires behind the radio and climate control area for the leds that will be under the drivers side
(ignore the audio cables)
4 now its just a matter of wiring them up they will only work one way so test them before u cap them.
5. put the leds were u would like them (to apply them to the drivers side you will need some sand paper to get it to stick and some extra double sided tape)
sorry this write up wasnt the best ive done but any questions feel free to ask
nice man thats a sweet idea i just wired mine to a light up switch.
2002
4g64 dohc turbo 5-speed
gt30r @20psi stock block,mbc
2.5" tbe
evo 8 ecu and maf
large fmic w/ cx racing intercooler pipes
wrx injectors @ 100psi fuel pressure
thanks after i soldered the dome leds i figured i might as well wire these up there 2 its only an extra 20 minutes to do it this way about
lmao this time ill rember to solder first run wires 2nd lol only make that mitake once
Bookmarks