yes. if you look at where your factory lights are grounded u will probably see there are multiple things being grounded at the same spot.
Can you have more than one ground contact in the same spot? I am not 100% sure about wiring so... I have a harness for my JDMs and it has 4 grounds. If I find a spot can i put down two on the same contact point?
"Why fart and waste it when you can burp and taste it!"
yes. if you look at where your factory lights are grounded u will probably see there are multiple things being grounded at the same spot.
Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.
dont see why not as long as the screw/bolt you are using is a good sized one, also helps to sand off any paint to make really good contact
thanx....just making sure. I havent gotten the front end off the car yet....still trying to figure that one out. I have no idea how to get the bumper off or the T-bar. I took most of the bolts but there must be one that is hidden cuz the thing wont budge
"Why fart and waste it when you can burp and taste it!"
behind the griils there are 2 bolts.
bumper comes off first then the t-bar
"DSM's, making people mechanics since 1985"
Originally Posted by polishmafia
ugh what a pain in the ass....I cant even find the bolts holding the bumper on...well not all of them. This is going to suck
"Why fart and waste it when you can burp and taste it!"
arrows indicate direction of bolts
"DSM's, making people mechanics since 1985"
Originally Posted by polishmafia
the bolt by the corner lamp needs a 12" extension and for you to peel the liner away a little to get to it. it's far in.
the others are easy to see
"DSM's, making people mechanics since 1985"
Originally Posted by polishmafia
crap....I need to go buy some more tools! LOL
"Why fart and waste it when you can burp and taste it!"
all you need is a 10mm socket(deep socket or regular) and 12" extension
you start with the bottom bolts first. then you peel the inner liner slightly and you either take the wheels off or turn them so you can get more room. slight the socket and extension in and loosen the bolt.
"DSM's, making people mechanics since 1985"
Originally Posted by polishmafia
Bookmarks