use a small drill bit and drill like 2-4 holes, there are a few spots in the fogs where you can see where the inner and outer lenses are a little more spread apart. thats where you want to drill
For guys with NEW STYLE fronts
What did you guys do to stop this ...I remember raz76 told me to drill a hole...for those that did were did you drill a hole?....any other methods?
use a small drill bit and drill like 2-4 holes, there are a few spots in the fogs where you can see where the inner and outer lenses are a little more spread apart. thats where you want to drill
that's what i did, It's called Bulb Grease, its sold at your local autozone. Your suppose to put the grease at the base of the bulb(893) and i even put some on the outside the bulb where it sticks out (if you already changed the bulb you'll know what i'm talking about). I haven't had the "Condensation" (lol @ family guy) problem at all.
"Triangle Circle Triangle Square"
the problem is the condensation forms between the 2 leses there is a front plastic cover as well as individual ones for each light once you drill the couple holes it lets the mousture release
Bookmarks