Baby G ~ 2000 Galant ES I4

**mrg7243** · 10-18-2010, 12:32 AM

hmmmm i have always thought about blue rims on a silver g. I really want to see the results.

**showtime** · 10-18-2010, 02:33 AM

looks good, i like the color!

**WhiteGalant** · 10-18-2010, 02:43 AM

That color is SWEET!!!!

**E_Emerson88** · 10-18-2010, 03:44 AM

Originally Posted by mrg7243

hmmmm i have always thought about blue rims on a silver g. I really want to see the results.

x2, i like the color, but not sure how it would look with a silver car.

**IVORY_G** · 10-18-2010, 09:12 AM

I like the color, really pops out at ya. Im tryna picture it in my head, it could work well but Im not sure. Have to see pix before I make a final judgement, LOL!

**polishmafia** · 10-18-2010, 09:38 AM

Originally Posted by 4g63lover

I have to run the spacer for them to fit because they have a smaller hub bore (about 1mm) so the offset ends up at +25.

This is not a good idea. All USDM cars made in the last 20 years are made with the hub being the part of the wheel that carries the load. If you use spacers, the wheel studs will be handling the weight of the car. This causes extra strain on them, and they can potentially snap.

Anyhoo... I like the blue color. :)

**4g63lover** · 10-18-2010, 10:00 AM

Originally Posted by polishmafia

This is not a good idea. All USDM cars made in the last 20 years are made with the hub being the part of the wheel that carries the load. If you use spacers, the wheel studs will be handling the weight of the car. This causes extra strain on them, and they can potentially snap.

Anyhoo... I like the blue color. :)

Thanks bro.

I've had the bolt-on spacer for the 2G wheels so Im just using the same spacers.

**4g63lover** · 11-10-2010, 02:29 PM

Here is how she sits. Got rid of the P0505 IAC code and got her emissions tested yesterday and she passed with flying colors! Cleaned up the rear window of the stickers, though I kept a couple and just waiting on a new TGC sticker. I like it better stripped of most of the stickers. I dont know what I was thinking. Soo much cleaner looking this way. Also got my windshield banner made to rep the Sosick.

**bsilver23** · 11-10-2010, 04:27 PM

lookin good dood

**mrg7243** · 12-01-2010, 03:01 PM

hey Jigz, can you post up a link to the store that had that header again?? i have been battling the OEM manifold with a leak right at the top cat, i clicked on the link you had and it just took me to exhuasts on ebay(not for the G)

Also when are you going to mount the blue wheels you have??

blue8g · 12-01-2010, 05:04 PM

Originally Posted by mrg7243

hey Jigz, can you post up a link to the store that had that header again?? i have been battling the OEM manifold with a leak right at the top cat, i clicked on the link you had and it just took me to exhuasts on ebay(not for the G)

Also when are you going to mount the blue wheels you have??

When he has winter tires.

**4g63lover** · 12-02-2010, 03:46 PM

Originally Posted by mrg7243

hey Jigz, can you post up a link to the store that had that header again?? i have been battling the OEM manifold with a leak right at the top cat, i clicked on the link you had and it just took me to exhuasts on ebay(not for the G)

Also when are you going to mount the blue wheels you have??

All I did was look up "2000 Galant header" On ebay. It's a Mega knock-off though there were only four of them when I was looking around.

Originally Posted by blue8g

When he has winter tires.

This. lol Too broke to buy them since I'm saving up to get a ring.

**mrg7243** · 12-02-2010, 04:00 PM

Ah, gotcha

http://cgi.ebay.com/ebaymotors/00-05...item255f3c6fdf

do you think this will work, cause all of the eclipse headers have a 3 bolt flange on it, the picture shows two on this one?

**4g63lover** · 12-02-2010, 06:16 PM

If thats the actual product you're going to need to get a custom downpipe section made.

**mrg7243** · 12-02-2010, 10:21 PM

hmm i figured so,
or is this the megan racing one that ivory_g was talking about?
http://www.meganracing.com/product_d...id=337&catid=8

sorry for blowing up your thread with questions

**IVORY_G** · 12-02-2010, 11:57 PM

Originally Posted by mrg7243

Ah, gotcha

http://cgi.ebay.com/ebaymotors/00-05...item255f3c6fdf

do you think this will work, cause all of the eclipse headers have a 3 bolt flange on it, the picture shows two on this one?

Actually this will work, bcz all that third hole is for is to mount to a bracket that is attached to the engine block. But it should bolt up directly to downpipe with no problem. Other thing is that you'll need to do is extend the O2 sensor wire, if that is the actual product pictured. Bcz the O2 bung sits more to the middle on the OEM exhaust manifold.

Originally Posted by mrg7243

hmm i figured so,
or is this the megan racing one that ivory_g was talking about?
http://www.meganracing.com/product_d...id=337&catid=8

sorry for blowing up your thread with questions

^That is the exact one I have.

**4g63lover** · 12-26-2010, 06:24 PM

My girlfriend now Fiance is spoiling me by decking out the interior in the G. Last year a shift knob, this year a Momo Monte Carlo steering wheel and Momo hub.