All badges are fine to remove without leaving holes except the Mitsu logo on the trunk.
Does anyone that has a 2002 LS know which badges are attached with adhesive? I figured all of them were, I just wanted to make sure.
All badges are fine to remove without leaving holes except the Mitsu logo on the trunk.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
The diamond one on the trunk or the "Mitsubishi" Logo on the left side?
The diamond will leave 2 small holes when removed.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
Yeah, the letters that spell "MITSUBISHI," "GALANT," "DE/ES/LS/GTZ," and "V6" have adhesive but leave no holes. Only the diamond emblem does.
This is probably a stupid question too but would a hair dryer work in place of the heat gun?
Yes, it would. I never used it, though. Just pulled the badges off by hand or used a card behind them, and rubbed off the adhesive.
This is not a how to or a tutorial. Moved to the correct section.
If you post stupid and incorrect information, you will get red nuggets.
Bookmarks