sub enclosure

[mitsgalantes01]

Does anyone remember a guy on the old forum selling/making custom sub enclosurse for our spare tire compartment? Im looking for that info. if anyone has some...

thanks,
Jason

[SilverKnight]

make your own here is how:

take all the carpet off the floor and remove the spare.
cover the tire well with tin foil and start to apply fiberglass over the tin foil.
one layer is fine for now.
let sit for about 24 hours or use a hair dryer for faster drying between layers.
remove when fully dry and you have the bottom of your box.
cut out your piece of board you will be using about six inches bigger then the tire well on all four sides.
cut in the hole to the right size of the speaker. make sure you center it and add a hole on the edge for the speaker wire, i suggest you get a speaker terminal from like radio shack just cause it looks alot nicer.
add the bottom fiberglassed piece you made and fiberglass it to the bottom of the board, i suggest you do about 5 to 8 layers of fiberglass to make sure its air tight.
let dry like the previouse step above.
WHALAA you have a custom built spare tire well speaker box.