03 ES 5spd--Rota torque gloss black 17x8 et. 35--Hankook Ventus V12 evo 235/45/17--D2 coilovers--DC Sports STB--Intake--Brembo calipers--Powerslot Rotors--Stoptech Pads--SS brakes lines--35% tint--5k heads & 5k fogs--Alpine headunit--Kicker 400w amp--Alphasonix sub
I got some missing pieces for my underglow lights so I can decide if I want to install them.
Bulb in the circle of my third gens was out when I stepped on the brake. Got to Autozone & replaced it. Oh yeah & washed it too.
pretty sure my oil line is fixed but still leaking oil onto my downpipe so im thinking its the turbo so im gonna take out this ar 50 and gonna drop in the ar 70 might as well put in the bigger turbo moar boost XD.
2002
4g64 dohc turbo 5-speed
gt30r @20psi stock block,mbc
2.5" tbe
evo 8 ecu and maf
large fmic w/ cx racing intercooler pipes
wrx injectors @ 100psi fuel pressure
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
i pulled the windsheild washer resivour cause it was leaking, let me tell you it is a bitch to pull if you dont pull the bumper. Took me 15min to get the three bolts off and scratched up hand. As of right now the plastic weld is drying i will let it cure for 24 hrs.
With the deicer crap the put on the roads here it forms a film on the outside, Since i couldnt use the wahser i would have to at stop lights, stick my arm out the window spray window and hit the wipers hahaha
Got my fogs in the mail & replaCed my park light bulb on the passenger side in my 3rd gen JDM tails:)
- Chris -2006 Mitsubishi Eclipse GS 5MT: My DD
2001 Mitsubishi Eclipse GS 5MT
________________________________________________
DRL Delete | 6K HIDS | AUX Cord Wired in RF Head Unit | DC Sprots CAI | OBX Longtube Header | Aero Turbine 2540i Muffler
2002
4g64 dohc turbo 5-speed
gt30r @20psi stock block,mbc
2.5" tbe
evo 8 ecu and maf
large fmic w/ cx racing intercooler pipes
wrx injectors @ 100psi fuel pressure
i drilled a hole in it and pushed the pump in now i dont have that huge ass container there anymore and the fill cap sits waaaay lower so its not sticking up but i mostly did it to make room for my oil cooler and intercooler pipes still i havent had any problems with it at all.
2002
4g64 dohc turbo 5-speed
gt30r @20psi stock block,mbc
2.5" tbe
evo 8 ecu and maf
large fmic w/ cx racing intercooler pipes
wrx injectors @ 100psi fuel pressure
hmmmm alright, can you shoot a picture for me??
took it for a semi-hard run and almost ditched it on two accounts!
Only sonata f5m42 swapped. N/A build in motion.
yea np ill snap 2 pics tmrw to show ya.
2002
4g64 dohc turbo 5-speed
gt30r @20psi stock block,mbc
2.5" tbe
evo 8 ecu and maf
large fmic w/ cx racing intercooler pipes
wrx injectors @ 100psi fuel pressure
I didn't buy this....'twas a Christmas gift
Awesome nonetheless
installed a mass airflow sensor adapter with a 4inch inlet and a cone filter man does it sound wicked now. and patched my radiator. now its time to clear out my headlight and find a cheaper magnaflow muffler
2002
4g64 dohc turbo 5-speed
gt30r @20psi stock block,mbc
2.5" tbe
evo 8 ecu and maf
large fmic w/ cx racing intercooler pipes
wrx injectors @ 100psi fuel pressure
Bookmarks