the maximum offset you can go with is 45 and a maximum width of 8 inches.
Hallo
I am new to the forum and can not be found to my problem. I wonder what the maximum offset and the rim width can give to my galant year 2001.
sorry to my bad english
the maximum offset you can go with is 45 and a maximum width of 8 inches.
BS. I am running an 8.5" wheel and it fits, doesn't rub.
there isn't a max offset max width. its a combination. of the two. For example, A 8.5" wheel with a +20 offset will rub on the fender, but a wheel with a +50 offset will rub on the suspension components, and then a wheel with a +38 might not rub at all.
Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.
im running 18x8 in the front and 18x9 in the rear, +38 0ffset no rub
Nobody built like u, u desighn ur self.
5spd swap
full custom body conversion
18x9 Works VS
Big 16g evo3T next project
I want to put on rims 18 or 19 inch. I would not like roll fenders
Sorry buddy. If you go with 18 or 19 I will recommend rolling the fenders. It depends the rim offset and tires settings you get. Don't go above 18.
You can run 18x7.5 +40mm to +45mm offset with either 215/40R18s or 225/40R18s without issues.
Now I got 17 inch, ET38, 7,5J
foto
So then 18's on my 8g wont rub or nothing?
I ran 19x8 with +40 offset with 225/35-19 tires with no rub at all and I'm lowered.
2001 w/Old Style VR-4 front conversion
Bookmarks