Log in
Register
Reply With Quotesome automatic cars has the tranny cooler built into the radiator. most auto cars when going to an upgraded radiator have to get an external transmission cooler. we have an external auto tranny cooler stock.
Ok I am always thinking of questions about the Galant that are not thread worthy and I don't want to spam the random thoughts thread with them so I thought that we should have a general question thread. So first question.
1) what's the difference in a radiator for an auto and a manual transmitions?
Btw I think this should be a sticky for all stupid, little, or just simple questions that don't need threads.
Originally Posted by wetamup2k3g
some automatic cars has the tranny cooler built into the radiator. most auto cars when going to an upgraded radiator have to get an external transmission cooler. we have an external auto tranny cooler stock.
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Thanx Chris.
Last edited by mko; 01-27-2011 at 10:14 PM Reason: non sense
2) Does a fan shroud really help all that much? Should I worry with getting one when I get a new radiator?
The shroud is a good thing to have, but with the high speed/volume fans, it doesnt matter. I'd spend money on shroud only if I had extra. I've been running dual slim fans on stock radiator for almost an year w/o problems
Well I'm going to go ahead and get the 2g aluminum. There is one on eBay for about $250 and it comes with dual 12" fans and the shroud. I think thats what I'll get. Ever heard of CXRacing?
yeah, their 16g ebay turbo suck, but i havent heard of radiator complains.
As soon as you get it fill it with water to test it. make sure you buy an item that has at least a week of replacement warranty.
i heard their new 20g is better and the 16g came a long way and they are now used by the dsm graveyard/ graveyard motorsports.
clearly MHI is better,
i am looking into going with a mishimoto 2g radiator
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Ya mishimotos are good but this is about the same price with shroud and fans.
Okay I am confused as to why this is a sticky with alot of OT posts... is this a real thread for all general car or did you just want to make this specific to the 7G and if this is supposed to be serious which I think it is a good idea we should probably keep the OT posts in random thoughts...
So 98mgalant since you are the OP let me know...
Ok So i cleaned up the thread of all non contributing posts. Back on topic, and this is a 7g forum so stick with 7g "stuff" discussions
So I want this to be a thread for all the little questions that people have about their 7gs. The questions that are not thread worthy. Like "where is the trunk light located?" or other non thread worthy questions. I see and have them all the time. I intended this thread to be for 7gs only but maybe there should be one for 9,8, and 6gs also. I think that it could cut some of the nonsense threads if people use it. But I was just thinking that maybe it would be better if it were in the problem section. But I don't know about that so it's up to you.
So I'm looking at some camber kits. 2 corners usually means both sides right?
what kits are you looking at? i was looking at SPC adjustable ball joints and rear camber kit when i was slammed
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
http://www.autopartswarehouse.com/sk...n+%26+Steering
Idk about the front yet. I have adjustable ball joints but bigO said they were maxed out but I want to check befor I buy new ones.
http://www.cimotorsports.net/motor-s...ipsetalon.html
Where do these go? Do they replace the ball joints?
I think that I'm the only one that likes this thread.lol
the first one is for the rear upper control arm, it pushes the cotrol arm out and pushes the top of the tire out as well.
the second i have no idea
go on ebay and look up the SPC camber kits, how lowered are you as they have kits for how low you are. check that if you can.
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
where can i find the spc adjustable ball joints, they were on ebay a while back
Last edited by Predat-R; 02-02-2011 at 02:04 PM
Nobody built like u, u desighn ur self.
5spd swap
full custom body conversion
18x9 Works VS
Big 16g evo3T next project
search SPC they make the adjustable balljoints as well
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Does anyone know the actual model number for the 7G auto transmission? I know my engine is "4G64", but I can't seem to find a plaque card anywhere on my trans that shows what kind it is.
It's a '97 galant ES auto. Thanks!
"Speed never killed anyone. Suddenly becoming stationary...that's what gets you." - Jeremy Clarkson
1997 Galant ES with '94-95 style front end and '97 style rear
Posting Rules
Bookmarks