mysticj's 2011 Build

[mysticj]

very nice

now do a pull

I'll see tonight if my camerawoman is up to the job.

Nice! this has been soooo long in the making. I can't wait to see some numbers.

Coolant temp sensor?

are you still running the stock exhaust?

When I had a stock GS I remember hollowing out the cat and it making damn noticable difference in power, throttle response, sound(even through the stock muffler) and top end. It was like a whole different car.

How about one of these?

I have coolant temp sensor, it's under the t-stat housing. yes running stock exhaust for now...working on a replacement as well as a HFC. I need to finish collecting items for my cam swap.

[Exhaust power]

Is that the intake making all that noise? you need to run it into a CAI. And i can see the throttle response is pretty damn good.
What are you going to use for a A/F control? I might jump on the tac trix cable because i want to up the redline.

[DOHCstunr]

vrsexhaust.com get a 2g GST mandrel tubing kit, and a 30" 2.5" inline magnaflow muffler and a vibrant performance muffler for the back. the sound is like the car should have sounded from the factory. You will get compliments, and you will love being able to hear your music and talk on the highway without a droning exhaust.
Best exhaust combo hands down for our cars(any car really).


As far as the coolant sensor i was wondering why the sensor on top of the tstat housing wasn't hooked up. thats the one i used to for my ECU like stock. Then one of the lower ones for the gauge cluster.

[mysticj]

Is that the intake making all that noise? you need to run it into a CAI. And i can see the throttle response is pretty damn good.
What are you going to use for a A/F control? I might jump on the tac trix cable because i want to up the redline.

yes, it's sucking alot of air...planning to add a 3" flex tube to the front.

I'll look in the exhaust setup you mention John

[mysticj]

Sneek Peak

[Exhaust power]

sweet. Do i hear a idle video soon?

[mysticj]

Hopefully within two months

[RacerX4g64S]

Where did you find the gasket for the cyclone intake???

[mrg7243]

I am confused i see a trubo manifold form the looks of it, and then a header? whats the plans

[mysticj]

Where did you find the gasket for the cyclone intake???

Didn't...ultra black RTV

I am confused i see a trubo manifold form the looks of it, and then a header? whats the plans

Converting the manifold for NA duties. Got it dirt cheap, just need some rewelds in the collector section.

[Galanttuner10]

damnit y cant i see your pics anywhere!!!

[mysticj]

damnit y cant i see your pics anywhere!!!

I don't know why you cannot see my pics. :(

[Galanttuner10]

I don't know why you cannot see my pics. :(

i can see them on my iphone. i just looked. good work man keep it up

[mysticj]

Looks like I'm installing cams this weekend...water pump shaft broke!!! LOL

[mysticj]

Bitchin'!!!

[DOHCstunr]

Awwwwww i want vids, and dyno's and to drive it.

[mysticj]

No vids right now but I have pics.

[mysticj]

http://www.youtube.com/watch?v=MCkHXe8aoJc

[mysticj]

Well, remove the stock cat & install a test pipe...I need a muffler as the stock one is becoming past it's prime. Going to do some logs tomorrow and probably the whole weekend as I will be gathering data for the Eprom ECU.

[mko]

why ont you share how you do this^