mysticj's 2011 Build

[mysticj]

I will

[mko]

what are you gonna do with the stock G stamped cams

[mysticj]

They have been used for the Delta regrind cams already. Right now, I have the Hyundai cams in the garage. Working on getting the Evoscan parameters right for the GS ECU.

[mko]

According to ECM Link, the Evo 1-3 and RVR ECU have very slow BAUD transfer rate. The slowest of all other DSM ECUs and thats why they cant be logged. There's a jumper there that needs to be moved in order for the ECU to be logged. I am assuming that after the jumper is put in the correct position, the ECU will be able to be logged with Evo Scan

[mysticj]

According to ECM Link, the Evo 1-3 and RVR ECU have very slow BAUD transfer rate. The slowest of all other DSM ECUs and thats why they cant be logged. There's a jumper there that needs to be moved in order for the ECU to be logged. I am assuming that after the jumper is put in the correct position, the ECU will be able to be logged with Evo Scan

slowest to log and longest to connect if using the Hybrid feature and can only log about a max of three parameters. I'm using Evoscan 2.7 using the MUTIII protocol since I can't connect using the Hybrid protocol but the Hybrid protocol contains the correct addresses to contain accurate info from the ECU.

[mko]

this

[mysticj]

That's a lot of work. The cable I build allows me to log. I try Evoscan 2.5 using Hybrid...didn't connect but try Mitsu protocol and connects within 5 secs. Pretty fast.

[mysticj]

Nice! this has been soooo long in the making. I can't wait to see some numbers.

How about one of these?

Where sir, should I mount this thing?


Also, I pick this up...a 3G MAS

[Exhaust power]

Nice so whats the point behind using the 3g eclipse maf?

[mysticj]

Nice so whats the point behind using the 3g eclipse maf?

It flows ~25% more air/less restricted than the 2G MAS.

[beam514]

I guess the 8G and 3G didn't have the same MAF? mine looks nothing like that lol

[Galantman03]

mine looks like that

[mko]

That's a lot of work. The cable I build allows me to log. I try Evoscan 2.5 using Hybrid...didn't connect but try Mitsu protocol and connects within 5 secs. Pretty fast.

can you flash with this cable?

[beam514]

mine looks like that

maybe it is the I4 MAF that looks different? Mine actually has honeycomb shapes lol

[Galantman03]

oh snap, lol mine has honeycomb shapes too... (facepalm)

[mysticj]

can you flash with this cable?

No, not the one I build. But if I can build one for the 01+ ECU w/o being expensive, I will let you know...

[mko]

can you disable error codes from popping up?

[mysticj]

with evoscan, yes....when plug into the car but not without. Is it the 43 code: EGR?

[mko]

yes indeed, plus i want to delete the entire evap system and clean up the engine bay

[mysticj]

i'm going to try using a resistor to simulate the correct voltage for the EGR temp sensor for the ECU. Do you know what the parameters are for a properly functional EGR system.