The Galant Center - Powered by vBulletin

Thread: 2.4 Rebuild....anyone recommend the best engine kit?

Showing results 1 to 4 of 4
  1. #1
    dewders
    Guest

    2.4 Rebuild....anyone recommend the best engine kit?

    I'm going to tackle a 1999 Galant 2.4 when it warms up a bit here in the Frozen Tundra. Though not my first engine, but my first experience with a Mitsubishi. Does anyone have any recommendations as to the best complete engine kit out there. I see some "fly-by-night" looking kits on EBAY...any thoughts?

  2. #2
    Experienced TGC Member Galantfan88's Avatar
    Join Date
    12-03-2008
    Location
    Carteret & Manalapan, NJ
    Posts
    1,263
    Are you building up for performace or back to stock?

    Evo 8 ECU / 5 Speed Swap / Fully Built Forged Motor
    Turbonetics Turbo T31 Stage 3 / RPW Stage 3 Camshaft

  3. #3
    TGC Regular shortdogg2k05's Avatar
    Join Date
    11-10-2004
    Location
    H-town, TX (the bayou city)
    Posts
    556
    partsdinosaur.com and rockauto.com I used them when I did my rebuild.
    I actually got my rebuild kit from the machine shop that reconditioned my block.


    Back from the dead!!!

  4. #4
    TGC Regular eclipsh's Avatar
    Join Date
    09-06-2008
    Location
    SW Colorado, USA @ 7600 ft
    Posts
    533
    I'm not sure if engnbldr has a kit but I'd contact them. Go to engnbldr.com. They sell quality stuff a lot cheaper than most others do. I used them for my 4runner's 2.4 22RE and it is doing fine. A lot depends on your machine shop though.
    - Nick, 94 Galant ES - 4G64 DOHC Turbo AWD, E3-16G & Manifold, 780cc inj, fmic, DS-MAP Speed Density

    "Ignorance more frequently begets confidence than does knowledge..." - Charles Darwin

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •