A supersupercharger on Galant 9

**stayer** · 04-05-2011, 01:15 AM

Hi all! I want to tell about the fabrication of the SC kit for 4G69. At the club 9G i told about this, but 9G does not exist. You do not know the final of this story. So. In may 2010 i started the manufacture of a supercharger kit.I bought the compressor PC 23 E. Later he brought me a lot of problems, but all in order.

Write through a translator, i 'm sorry. If it is possible to edit my posts, for understandable language. Why the name of the theme with two pages super? I do not know how to edit. Help to remove one word super from the title.

**stayer** · 04-05-2011, 01:20 AM

Compressor delivers 0,7 bara (10,15 PSI) with 50,000 rpm. Increase speed by means of a belt.

**stayer** · 04-05-2011, 01:24 AM

I first began to measure, as it will be installed.Poorly. Little space. He did not set where the belt.

**stayer** · 04-05-2011, 01:29 AM

I decided to do the same circuit as RIPP.

**stayer** · 04-05-2011, 01:41 AM

At first i made a shaft and a pipe. Later pipe manufactured anew, changed the landing of the bearings.

Later pipe manufactured anew, changed the landing of the bearings. The shaft is made of 4140 steel.

. Bearings japanese NSK.

**stayer** · 04-05-2011, 01:50 AM

In the city of Perm where i live a lot of military plants and factories. It makes engines for space rockets "proton". At this plant i have made mounting brackets. This is done with the help of laser.

**stayer** · 04-05-2011, 01:53 AM

The pipe is fixed in such a way.

For fastening i developed a new nut and he made them.

**stayer** · 04-05-2011, 01:58 AM

Further it is necessary to conduct work where the belt. Technological bracket should be cut into 1- inch.

Even made a part for installation of the parasitic pulley.

**stayer** · 04-05-2011, 02:01 AM

Further held parasitic pulley and bought a new belt.

**stayer** · 04-05-2011, 02:06 AM

Further it is necessary to install the compressor. I made the initial assembly of the shaft.

For turning grooves use the milling machine.

**stayer** · 04-05-2011, 02:08 AM

Then made a bracket for mounting of the compressor.

**stayer** · 04-05-2011, 02:11 AM

In my plan so must secured compressor.

**stayer** · 04-05-2011, 02:13 AM

For tensioning belt is bolt on the back side.

**stayer** · 04-05-2011, 02:16 AM

Further it is necessary to clean all the welding seams and painting powder paint made in the thermo chamber.

**stayer** · 04-05-2011, 02:32 AM

Then manufactured pipe for the MAF sensor.

Sanded it at the factory. Now he looks so

**stayer** · 04-05-2011, 02:43 AM

In parallel with the installation of the compressor, i did inscriptions. My friend from the forum club 9g.ru (welcome) designer.He made computer inscriptions.