you have to take the wheel and the rotor and caliper (to take off the rotor) and then theres the piece that holds them all in, just pound out the broken one and put the new one in its place.
i was changing my right rear tire on my 96' and put a lug nut in wrong, now the stud is broken and i can't screw in another lug nut, i know these are easily replaceable, but i can't figure out how to do it, help! i already have the replacement studs and nuts
you have to take the wheel and the rotor and caliper (to take off the rotor) and then theres the piece that holds them all in, just pound out the broken one and put the new one in its place.
1994 galnt es SOHC
pound it out with a rubber hammer...
n3oAcid24 = 01' Galant I4
Take drum cover off and hit the broken stud with a hammer, it will push to the inside and then when u get that one out. The same way u got that one out ur gonna get the new one in. Then use a lug on the stud to pull it thru the hole. Thats how i did mine
i figured it out, like Joker96 said, i had to take the drum cover off, thanks everyone!
do you know how to install new lugs?
ya lol i meant bang it out with a rubber mallet i prolly should of said that tho.....
1994 galnt es SOHC
Bookmarks