most of the stuff is going to be different... example
You can either use evo 8 injectors or wrx injectors.
Evo 8 injectors need a resistor box to work because they are low impedance.
I used blue wrx injectors rated to 565cc, plug and play because they are HIGH impedance BUT on stock ecu they flood the engine out at 4000 rpm
LOL haven't yet.... I'm using an evo 8 ecu, and made my own harness to connect it to our harness but... The car will not start at all, I think the pinout is wrong like 2 or 3 pins mixed up... idk for sure. But yes, I will reflash the evo ecu to stop the flooding issue hopfully in the next week we will figure out the harness issue...
I hated only having 1 vehicle, you're stuck if it breaks down.
Picked up the good ol Haynes manual yesterday. Gonna change my plugs and wires later today.
Got plugs and wires changed, thermostat changed, battery tray cleaned up, battery terminals cleaned up, fixed fog lights (although when i got back home the pass side isn't working again), and removed the license plate holder from the front bumper, (no front plate in PA)
And here's what you all have been waiting for!!
16G Turbo!!
![]()
hey there. i'm new to this site and need some help with my truck. do you know anything about first-gen toyota 4runners?
![]()
sub'd... just to see...
Bookmarks