And install total 2 nuts 2 bolts the nuts screw onto the master cylinder studs and the screw to the firewall
so im trying to install my clutch pedal and i cant figure it out for shit!! i have search but none of the how tos show u how to install the clutch pedall someone help, and i can seem to remove the old old fltwheel and clutch please help me or call me 413 347 1708
STAY READY AND YOU WONT HAVE TO GET READY!!
And install total 2 nuts 2 bolts the nuts screw onto the master cylinder studs and the screw to the firewall
Last edited by OMEGA PHX; 07-02-2011 at 10:58 AM
4g64T 5spd
Take a picture of what is still connected to your engine. i have a feeling you are talking about the flex plate and torque converter.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
so i have removed the flywheel,clutch and mounted the clutch pedal,tranny is in,shifter cables and base(pain in the ass!!? anyways,the clutch has two connecters on it where do the go.also how do i trick the ecu into thinking it in neutral,thanks
[IMG][/IMG]
STAY READY AND YOU WONT HAVE TO GET READY!!
The wire is probably for a neutral safety switch
the connector is so the car wont start unless you depress the clutch you can leave them disconnected. To make the ecu think its in neutral (the pic is from beam i just added text):
4g64T 5spd
haha thanks for fixing my pic OMEGA :)
Galant1983, you don't need to connect those connectors on the clutch pedal to anything, unless you are swapping to a Manual ECU.
ok well i just ran into an issue! when i bolted up the starter and started the car it made a crazy noise, what could that be?
STAY READY AND YOU WONT HAVE TO GET READY!!
make sure your starter plate is align properly and the start is sitting in it right position.
Only sonata f5m42 swapped. N/A build in motion.
Can't remember, but do the I4 guys need the manual starter-locator-plate?
no we dont i dont even remember there being a plate at all for i4. My guess is his starter is off center and needs to be moved around till it hooks up properly.
Only sonata f5m42 swapped. N/A build in motion.
Bookmarks