The Galant Center - Powered by vBulletin

Thread: Oil pressure switch

Showing results 1 to 11 of 11
  1. #1

    Oil pressure switch

    What's the best brand of oil pressure switch? 2002 4cyl galant es thanks.

  2. #2
    Quote Originally Posted by Hevymetalg View Post
    What's the best brand of oil pressure switch? 2002 4cyl galant es thanks.
    Anyone know what the best brands for replacement parts?

  3. #3
    TGC Lifetime Patron oakrdrs187's Avatar
    Join Date
    05-14-2010
    Location
    Coachella, CA
    Posts
    5,954
    If you want it to last as long as this one did, Mitsubishi.

    If you're pockets ain't that deep local auto parts, I went to Kragen O'reilys and spent about $7.

  4. #4
    Quote Originally Posted by oakrdrs187 View Post
    If you want it to last as long as this one did, Mitsubishi.

    If you're pockets ain't that deep local auto parts, I went to Kragen O'reilys and spent about $7.
    Cool, when you replaced yours how did you get to it? Did you get it from under the car or did you get it from the top? I have the 4cylinder. Thanks

  5. #5
    Nevermind I got it... After I pulled the power steering pump and bracket damn it!! I found it on back of the engine fire wall side.

  6. #6
    TGC Lifetime Patron oakrdrs187's Avatar
    Join Date
    05-14-2010
    Location
    Coachella, CA
    Posts
    5,954
    What made you think it was next to the P/S Pump?

    Well at least you got it?

  7. #7
    Quote Originally Posted by oakrdrs187 View Post
    What made you think it was next to the P/S Pump?

    Well at least you got it?
    The stupid haynes manual, it said it was closes to the timing cover? Wtf? So I looked on the side that's pretty much wide open and I didn't see it anywhere so I seen a wire running down behind the power steering pump and figured it was there lol!! O well whatever I got it and the oil light is off all day everyday!

  8. #8
    TGC Lifetime Patron oakrdrs187's Avatar
    Join Date
    05-14-2010
    Location
    Coachella, CA
    Posts
    5,954
    I have the Haynes manual. It specifies where it is, you must have looked for one of the DOHC engines or V6.

  9. #9
    [QUOTE=oakrdrs187;687361]I have the Haynes manual. It specifies where it is, you must have looked for one of the DOHC engines or V6.[/QUOTE
    No! Look in section 2. 4cyl

  10. #10
    TGC Lifetime Patron oakrdrs187's Avatar
    Join Date
    05-14-2010
    Location
    Coachella, CA
    Posts
    5,954
    I don't have it with me but I think I remember having trouble finding it too, my bad. I searched on the forum and found it through a post. Someone said it was close to the water tube behind the block.

    Fuckin Haynes that queer!! LOL. Although it does separate the 2.4 and 2.0 alot, so much it gets confusing cuz they'll put up a diagram of only one and not both, they just say the other motor is different in text.

  11. #11
    Quote Originally Posted by oakrdrs187 View Post
    I don't have it with me but I think I remember having trouble finding it too, my bad. I searched on the forum and found it through a post. Someone said it was close to the water tube behind the block.

    Fuckin Haynes that queer!! LOL. Although it does separate the 2.4 and 2.0 alot, so much it gets confusing cuz they'll put up a diagram of only one and not both, they just say the other motor is different in text.
    I hate Haynes!!!

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •