Log in
Register
Reply With Quoteinstalled another tranny in my car,but this time it a 2002! not that it makes a difference
^^^ any plan for those seats Exaust Power?
2002 ES i4 SOHC Mitsubishi Galant
installed another tranny in my car,but this time it a 2002! not that it makes a difference
STAY READY AND YOU WONT HAVE TO GET READY!!
lol mine are plenty brightOriginally Posted by oakrdrs187
lol why did my galant not come with a dome light in the headliner...backseat is completely dark...i hate it!Done a bunch of mods over the 2 months that i never posted. But here are my blue shiz installed, did the fronts not too long ago.
Yes i have plans to get black back seats i was eyeing up the sonata ones since they come in black but those seats are fold able so i would need two extra hooks to make it work and maybe then some. Im not sure if the diamante came with black seats but im looking forward to finding some. And my original option is to dye my original back seats with black dye.
I wired and installed them in my galant i have bage diamante ones if you would like for $25 .
Only sonata f5m42 swapped. N/A build in motion.
I wired and installed them in my galant i have bage diamante ones if you would like for $25 .[/QUOTE]
Shoot me some pics..
[email protected]
Gonna have to show me how u wired them up
installled new fuel lid, new HVAC, spark plugs, clean Injen Filter, and painted some engine bay parts. I need to install this fender but I got lazy. ill have to wait till next weekend...
n3oAcid24 = 01' Galant I4
Shoot me some pics..=BassinG;695843]I wired and installed them in my galant i have bage diamante ones if you would like for $25 .
[email protected]
Gonna have to show me how u wired them up[/QUOTE]
[/QUOTE]
Check your email its simple enough.
Only sonata f5m42 swapped. N/A build in motion.
Let's see, on the Diamante I replaced the valve cover gaskets and spark plug tube seals. I replaced the spark plugs and wires. Replaced the EGR tube gasket and lower manifold gasket. Found out the lower manifold stud was damaged and the nut was completely stripped out. Hit the JY and got a few replacements. Got everything back together and the oil leak is gone! But the rough idle is there. Turns out, I had my CEL on for a while, there was a EGR code in there I didn't see until today. It's raining now, so I gotta do the EGR valve, foglight changeout, headlight changeout, rear brakes and power antenna tomorrow after work. Fun stuff.
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
Upgrade my windshield to performance one =]
TURBO= in the making.......
WTF happened?!?!?!
Baised upon the marks on the hood i am going to say the hood flew up
yeah i saw his other thread, damn . . . . . .
I cut a hole in my floorpan today. It took a lot of patience and testicular fortitude to get it done.
And when I say hole, I dont mean like I drilled a hole. I had to make two 11" cuts. Im still in shock.
99' Galant ES
4G64/63T
AEM EMS
^^^ for a trap door????
for the Gsx fuel tank with double pumpers?
LOL. No trap doors, I have ejecto seats!!1 LOL 2F2F reference.....
Nah the tank and pumps are already in place. I had to make more clearance for the monster 3.5" driveshaft and tail of the transfer case.
99' Galant ES
4G64/63T
AEM EMS
Vacuumed, Washed, Dried (with my cool non-shamwow), waxed, and handed the keys over to my girlfriend, her turn to enjoy the Challenger for a bit
^^^I just hope it doesn't come back scratched, dinged, curb rashed and with a cool flat tire on it.
Posting Rules
Bookmarks