Log in
Register
Reply With Quote^^Knock sensor perhaps? Anyway, how hard was the control arms and tie rods to do?
Putting in work! Put on new A arms , tie rods and found my camber bolts to go back in. I sprayed my o2 sensors down with mas cleaner and brake cleaner hope that could fix things lol.
<script src='http://imageshack.us/shareable/?i=091411135700.jpg&s=190' type='text/javascript'></script></noscript>
Idk what the heck this thing is pulled it out of the back of a eclipse block....
:D
Only sonata f5m42 swapped. N/A build in motion.
^^Knock sensor perhaps? Anyway, how hard was the control arms and tie rods to do?
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
yep, that looks like a knock sensor to me too
Not hard at all cheif, unless you are doing the inner tie rods you gonna need special tool. Autozone has it in their loan a tool program. Without it super bitch to do.Originally Posted by wetamup2k3g
Thanks homeslice, was wondering if bolts were froze up, I think I may have to do this soon, front end is starting to wander a little, get out the G and into the D and you notice it.
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
First of all you need a BFH! and some elbo grease the toughest part i found was banging the joint/stud out of the knuckle. For the passenger side took longer since i had to jack up the engine since the oil filter was in the way. I have a i4 btw and there 2 different kinds of control arms for the 8th gen so make sure you get the right one. Each side takes about a hour give or take. The outer tie rods are cake lol
yepo!
Last edited by Exhaust power; 09-14-2011 at 07:31 PM
Only sonata f5m42 swapped. N/A build in motion.
BFH?! Got that, a 4lb mini sledge that'll wreck shop lol, I can borrow the 16lb joint from work if I need to! I'm 4cyl too, will make sure I get the right ones, thanks.
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
Do you have air tools?That would make it easier to get the bolts loose and stuff.
I do but I need an air supply to drive them to use them at home, they stay in my toolbox at work where we have central compressed air lines every few feet, and i'll get suspended if they catch me working on my car at work lol.
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
Yeah an air compressor and an impact make it much easier for some things especially like frame bolts and stuff.
I got an Ingersol-Rand 1/2" and a Snap-On 3/8" impact that will bust through anything on a car like ours, they hold their own on the trains, and some of those fasteners are as big as 2.25" inch. I guess I may have to rent a compressor, because those things make the job so much easier.
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
picked up these today
i got two for 100 bucks, couldnt pass up on that... they are brand new although not to sure if they will fit, and if they will how hard it may be to make them fit. they are 18x9.75 +20
heres the possibilities.....
i also installed new black door handles
Yeah they do that is what we used to do my rack and pinion and we had to drop the frame a little bit to, and drop the column it was a pain in the ass but it is finally done.
Valley8g, I hope they fit because they are nice!
Logan, have you driven it yet?
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
Yeah i drove it a little today it is a little stiff but it probably has some air in it still.If it isnt any better in a couple of weeks then i will probably need a new power steering pump.
That's what's up, glad she's running, hope it gets cleared up without a new PS pump.
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
No problem and also the control arms differ from year.
Only sonata f5m42 swapped. N/A build in motion.
Yeah i was talking to chris(galanttuner10) and he said take the wheels off of the ground and turn the wheel like 10 times to the stops to bleed the air out of it.
valley8g .... they might fit in the rear and get a smaller size for the front and wallah!! staggered wheels lol
Snap-on>IR.
I bet the Snap-on hits harder.
Posting Rules
Bookmarks