NO that is for the mivec eclipse!
Will the stock 3.8 headers fit on the 6g72?
These.
http://cgi.ebay.com/ebaymotors/Eclip...item20bcb75180
If not will the obx/megen headers throw a ses?
Last edited by Silver_8G; 09-15-2011 at 04:35 PM
NO that is for the mivec eclipse!
those headers will not fit directly out of the box as the 6g75 (and 6g74) engines have a higher deck height so you would have to adapt the headers to work with the 3 liter
and then there is the matter of the angle the rear header comes of the head, it isn't confermed (as nobody to my knowledge has tried it), it is very likely the rear header will not clear the firewall and/or crossmember, basically it probably won't fit in an 8g Galant's engine bay
Last edited by foxbrand; 09-15-2011 at 06:33 PM
Thx guys great info.
Any knowledge on the ses light with the obx/megen headers?
If you get headers designed for the 2000-2005 eclipse 3.0 you will be fine.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
dotn know if you guys will be able to see this but it might be partially relevent?
its an a 3rd gen magna which stock runs either a 6G72 or a 6G74 (in this case stock was a 74) guy has initally done a 6G75 conversion without mivec and this thread talks about the conversion to mivec after that.
http://www.aussiemagna.com/forums/sh...91#post1434891
Aussie 380 GT: 20s, full zorst, Brakes, Interior
Looks like we need to register to view the link. Besides, 6g72 headers only need minor modification to fit the 6g75.
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
Bookmarks