Post What You Did To Your Car or Bought Today!

[finald8ta]

Installed an hid relay harness inside the fuse box ill post a how to later with pics

HTC EVO 4G

[galant1983]

new hids 6&3k
[IMG][/IMG]

tryed some 3d c.f vinyl on the gas cap!
[IMG][/IMG]

[99 galant]

gas cap looks good

[Rach3T8G]

^ X2 but like i said on FB, get that yellow film

[galant1983]

^ X2 but like i said on FB, get that yellow film

i know lol!

[mrg7243]

just wait for it to break in before you decide, because they will get deeper and more rich in color

[carl3g]

just wait for it to break in before you decide, because they will get deeper and more rich in color

This. Polly between 20 and 50 hours they will color shift.

[IVORY_G]

Where's the sub!?


Sent from my iPod touch using Tapatalk

I havent had my two 10" subs in there for more than 2 yrs. Got tired of the heavy bass and the lack of space.

^^ its under the magic trunk mat, LoL!

LOL!

[Samman]

gas cap looks good

x2

[mrg7243]

Ah spent some time with my car, the laptop, some wifi.........dont think dirty now haha, and the tactrix. Did some latency adjustments to try to bring the stft down, but got frustrated since the ECU hasnt cycled yet, I need to go do some driving.

[8thLS6]

Inner and outer tie rods...and hopefully alignment soon to fix tire wear

[oakrdrs187]

I havent had my two 10" subs in there for more than 2 yrs. Got tired of the heavy bass and the lack of space.

You wanna talk trunk space issues? Lol!

[oakrdrs187]

Just bought some Sylvania (Osram) Silverstar CBI D2S 5000K bulbs for a projector retrofit I haven't started yet, but for $145 shipped it was a steal for bulbs that cost $200 or better elsewhere:
http://i1114.photobucket.com/albums/...1/39e974ce.jpg
http://i1114.photobucket.com/albums/...1/c6790a0e.jpg
http://i1114.photobucket.com/albums/...1/608b8239.jpg
http://i1114.photobucket.com/albums/...1/4a235d13.jpg
http://i1114.photobucket.com/albums/...1/fd2a9faa.jpg
I want FX-R projectors but I may try some much superior LS430 projectors, but if so, I must get some JDM heads since LS430's are low-beam only.

Since you are doing quite a bit of research on HID retrofits and you are beginning to move forward with it, I have to ask, Why not just buy a DDM kit and select D2S as bulb size?

[carl3g]

Since you are doing quite a bit of research on HID retrofits and you are beginning to move forward with it, I have to ask, Why not just buy a DDM kit and select D2S as bulb size?

Oem bulbs are the only ones to be trusted when it comes to projectors, mainly optics. See, oem bulbs are more than likely to be straight, where as rebased have a greater chance of being not straight. When it comes to the optics of projectors, the littlest error can produce a bad cut off or a dark spot.

Am I making sense? Lol

[Laidback8g]

Just finished buying the ss lines for the brembo caliper (front) install tomorrow. Hopefully I'm going to have my girlfriend assist me with taking pictures, so I can do a write up.

[oakrdrs187]

Oem bulbs are the only ones to be trusted when it comes to projectors, mainly optics. See, oem bulbs are more than likely to be straight, where as rebased have a greater chance of being not straight. When it comes to the optics of projectors, the littlest error can produce a bad cut off or a dark spot.

Am I making sense? Lol

I know exactly what you mean. No newb here, I was mainly referring to cost. I also went over to hidplanet and did a bit of homework and now they have me thinking twice about aftermarket kits. LoL.

In reference to the example you gave about arc positioning, on the Tahoe/Yukon forum I go on from time to time, one of the members had a bad experience using eBay projectors with a PnP kit, he said the output sucked and posted pictures of drastically affected cut-offs and dark spots.

[IVORY_G]

You wanna talk trunk space issues? Lol!

Yeah that's ridiculous! LOL! That's how my first S13 (240SX) was when I stuffed two 12" subs in the trunk. Only space to put stuff on the sides and that was it! LOL!

[Isaurio]

You wanna talk trunk space issues? Lol!

LOL. talking about losing some HP there.

[samurai65]

I replaced the neutral safety switch, hoping it was the fix my car needed to start. No such luck.

[carl3g]

I know exactly what you mean. No newb here, I was mainly referring to cost. I also went over to hidplanet and did a bit of homework and now they have me thinking twice about aftermarket kits. LoL.

In reference to the example you gave about arc positioning, on the Tahoe/Yukon forum I go on from time to time, one of the members had a bad experience using eBay projectors with a PnP kit, he said the output sucked and posted pictures of drastically affected cut-offs and dark spots.

Hids in halogen projectors will do that lol. Hell, Halogen bulbs in halogen projectors from ebay suck. My buddy has a tc that's a show car with halogen projectors and its god awful.