Post What You Did To Your Car or Bought Today!

[Exhaust power]

For the prelude a week ago bought a antenna then found out the moron cut the cable that runs to the radio.


Uploaded with ImageShack.us
Today i bout the antenna cable from the jy a long with a stock black cluster to replace the egay one previous owner installed and a rear deck carpet.

For the galant i pulled another sonata transmission! took 4 hours by my self but i won!
AND a 02 pig tail. Got the tranny for $64. if it wasnt black friday i would of got it for $54 since its a week special deal.

[Skyforger]

Sweet deal on the trans. You keeping it as a spare? Or rebuiling it and flipping for a profit?

[njjfudge]

Got this for my gold 8g


Cylinder #4 was giving me a misfire, I pulled the spark plug and found this

[finald8ta]

Got this for my gold 8g


Cylinder #4 was giving me a misfire, I pulled the spark plug and found this

Danm hope it didn't bent a valve

HTC EVO 4G

[Exhaust power]

Sweet deal on the trans. You keeping it as a spare? Or rebuiling it and flipping for a profit?

Thats going in the galant spring time. The tranny in the car now runs fine except the fact that the reverse light witch is stuck and even though it shifts great i think its slower then when i first installed it. Since im looking forward to doing some engine internal work this will be perfect a nice stage 2-3 clutch is a must.

[ALCALA]

Today I painted my my diamond emblem and the plastic strip under it that says "galant" flatt black since I already had my grill painted in that color. Might do the v6 emblems in a bit, but I'm not sure yet lol.

[Redhaze]

Reading up on fiberglass thinking of trying it for the first time on that Crappy spare tire cover

[finald8ta]

Pick up backing plate for the rear disc conversion for 10$, also picked up a bunch of parts for the mustang 5.0 we have

HTC EVO 4G

[Skyforger]

Reading up on fiberglass thinking of trying it for the first time on that Crappy spare tire cover

Practice makes perfect. Fiberglass isn't the easiest stuff to work with, but the limitations of what you can create are endless.

[finald8ta]

Practice makes perfect. Fiberglass isn't the easiest stuff to work with, but the limitations of what you can create are endless.

I been playing with it at work a lot same with carbon fiber,

HTC EVO 4G

[99 galant]

carbon fiber is worse than fiber glass to work with

[Redhaze]

Winter mode installed my steelies noticed how ugly they are.. looking for a alternative trying to keep my rims off to give my transmission a little break from the heavy weight

Practice makes perfect. Fiberglass isn't the easiest stuff to work with, but the limitations of what you can create are endless.

Yea hopefully i can nail it on the first try maybe ill try glassing something small like a amp rack or something

[Skyforger]

Winter mode installed my steelies noticed how ugly they are.. looking for a alternative trying to keep my rims off to give my transmission a little break from the heavy weight

They're 15", right? Clean up the steelies, hit them up with tire shine, and nab a set of chrome trim rings, most parts stores carry the 15" trim rings.

[Corey2kG]

Besides cry about the dent I put this on lol.

[Redhaze]

Finally finished my Big 3 upgrade that ive been putting off for almost 3 months (pure lazy) all i had to do was connect the alternator to battery 0gauge .

[wetamup2k3g]

LOL @ House avatar^^

Finally I'm getting this retro off the ground, ordered FX-R 1.1 projectors and Morimoto D2S 35W ballasts today and got the Cyber Monday discount of 20% at The Retrofit Source!!!

[finald8ta]

Sweet can't wait to see the finished product, once I get my hands on a set of heads I might do this, only thing that bothers me is putting the head light in the oven just to take the lens off, with my luck ill forget its in the oven and ill have a pile of melted plastic, and a smelly house
HTC EVO 4G

[wetamup2k3g]

Sweet can't wait to see the finished product, once I get my hands on a set of heads I might do this, only thing that bothers me is putting the head light in the oven just to take the lens off, with my luck ill forget its in the oven and ill have a pile of melted plastic, and a smelly house
HTC EVO 4G

I'm gonna try the heat gun method, I think it'll be better for me than trying to throw 'em in the oven lol because I'm the same way.

[carl3g]

Good shit greg. I can't wait to see the output with the cbi. I like their white output but idk if I want the wash out when it rains.

[Redhaze]

Sweet can't wait to see the finished product, once I get my hands on a set of heads I might do this, only thing that bothers me is putting the head light in the oven just to take the lens off, with my luck ill forget its in the oven and ill have a pile of melted plastic, and a smelly house
HTC EVO 4G

Ill try it one day too myself when i understand it a little more only thing thats really stopping me is being able to align them inside the reflector and having the beam aligned i have 8ga and 8gb heads laying in my garage