what turbo manifold is that on the chair. looks like a nice stockpile of parts you got going on there.
what turbo manifold is that on the chair. looks like a nice stockpile of parts you got going on there.
Brandon - 2001 Galant GST 5speed
Wiseco // Eagle // PTE // Holset // Turbonetics // Supertech // Blox // Prosport // Vibrant // Innovate // OpenEcu // Mishimoto // Magnaflow // Walbro // XXR // Rotora // Brembo // Hawk // R1 Concepts // Dc Sports
Thanks Matt for the link, and as far as the manifold goes, idk the brand and either did the evo owner, but its never been used and it's an Equal Length T3 Manifold made with Stainless steel material and a 44mm wategate flange, thats all I know lol
yah thats a sweet piece, i noticed it was a t3 flange and that the wastegate outlet was on the correct side. nice pickup mind if i ask how much it was?
Brandon - 2001 Galant GST 5speed
Wiseco // Eagle // PTE // Holset // Turbonetics // Supertech // Blox // Prosport // Vibrant // Innovate // OpenEcu // Mishimoto // Magnaflow // Walbro // XXR // Rotora // Brembo // Hawk // R1 Concepts // Dc Sports
Do you have a garage on TGC? Your car can def make cotm
wait the manifold was 250? thats awesome
Brandon - 2001 Galant GST 5speed
Wiseco // Eagle // PTE // Holset // Turbonetics // Supertech // Blox // Prosport // Vibrant // Innovate // OpenEcu // Mishimoto // Magnaflow // Walbro // XXR // Rotora // Brembo // Hawk // R1 Concepts // Dc Sports
When it is, ill nominate you.
OK so kinda an update, its kinda been put on hold till I find another vehicle for a decent price BUT I'm fiddle fartin' around with a couple things
Removed all the bushings from the knuckles and the rear subframe to get ready for prothane inserts, and torque solutions subframe bushings. And the abs sensors are gone
You just gotta burn the mounts out, the rubber will catch on fire haha
Got the valve cover about a week ago with the front and rear evo axles. And also received a Boomba TB and the evo steering shaft
And I'm also toying around the idea of sending in the head to get worked on...
Also send the knuckles, rear drive shaft, u joints, disc backings and subframe to get sand blasted, and then only powder coat the knuckles for now.
Now, Im thinking about soda blasting the valve cover and brakes, since soda can dissolve in water, so I don't have to worry about getting sand in the engine oil upon start up, but I was curious if it will take off the paint decently on the brembos. Also who here has split the brembos to get powder coated and who hasn't. just kinda curious
^thanks man, it needs a little work BUT, can't be to picky I guess. Just gotta fix the front bumper, get some fogs, and new headlights. And then everything else that I have for the g will be swapped over to this, when I tear into the galant atleast.
From Boost Addicts to Carbon Fanatics™ www.socalautowerks.com
Censee: Im trying to pimp some hoes for money for the lsd. 3/28/2011
Cali: Sig 3/28/2011
Paint them, iirc its better for the calipers anyway?
Reg High Temp paint wont last you need Caliper Paint specifically. What I did was remove the Calipers and used some Brake cleaner to degrease them then used a steel wire brush that attaches to my drill to remove anymore excess dirt and grime. It got so clean my calipers looked semi-polished. Then I used G2 caliper paint and I've had no issues at all.
Bookmarks